• Quantifies test stand misalignment.
• Measures aerodynamics in wind tunnel models.
• Capable of measuring force via moment arms.

• Performance: Nonlinearity for Mx, My is ±0.5% of RO; for Fz is ±0.2% of RO. Cross Talk is ±2% of RO or less.
• Electrical: Rated Output (RO) varies; Excitation up to 18 VDC or VAC; Bridge Resistance is 350 Ohm nominal; Insulation Resistance is ≥500 MOhm @ 50 VDC; Connection via (3) 6 pin BENDIX receptacle (PT02E-10-6P).
• Mechanical: Approximate weight is 20 lb (9.3 kg); Safe Overload is 150% of RO; Material is 17-4 PH stainless-steel; IP Rating is IP65.
• Temperature: Operating Temperature ranges from -65 to 200°F (-54 to 93°C); Compensated Temperature is 60 to 160°F (15 to 72°C); Temperature Shift Zero and Span are ±0.01% of RO/°F (0.018% of RO/°C).
• Calibration: Calibration Test Excitation is 10 VDC; Standard Calibration is 5-pt Compression, CW; Available Calibration is 5-pt Tension, CCW; Shunt Calibration Values are specified for different loads.

• Low Profile Thrust and Moment Load Cell with Active and Fixed Ends.

• Item FSH02453: 10000 lb (Fz), 2000 in-lb (Mx, My), Deflection 0.001 in, Natural Frequency 7100 Hz, Rated Output 2.5 mV/V (Fz), 0.5 mV/V (Mx, My).
• Item FSH02727: 25000 lb (Fz), 10000 in-lb (Mx, My), Deflection 0.002 in, Natural Frequency 7100 Hz, Rated Output 4 mV/V (Fz), 2 mV/V (Mx, My).

• BENDIX 6-PIN (CC1) with specific pin color coding for excitation, signal, and sense.

FUTEK reserves the right to modify its design and specifications without notice. For complete terms and conditions, visit their website.