*mydirectindustry

MTA500 series

1 / 2 PagesView full catalog

MTA500 series

Product catalog summary

Features

Quantifies test stand misalignment.
Measures wind tunnel model aerodynamics.
Capable of measuring force via moment arms.

Specifications

Performance: Nonlinearity for Mx, My, and Fz is ±0.5% of RO; Cross Talk is ±2% of RO or less.
Electrical: Rated Output is specified in the chart; Maximum Excitation is 18 VDC or VAC; Bridge Resistance is 350 Ohm for Mx/My and 700 Ohm for Fz; Insulation Resistance is ≥500 MOhm at 50 VDC; Connection via three 6-pin BENDIX receptacles.
Mechanical: Safe Overload is 150% of RO; Material is aluminum for 250, 500, 1000 lb and 17-4 PH stainless-steel for 5000 lb; IP Rating is IP65.
Temperature: Operating Temperature ranges from -60 to 200°F (-51 to 93°C); Compensated Temperature ranges from 60 to 160°F (15 to 72°C); Temperature Shift Zero and Span are ±0.01% of RO/°F (0.018% of RO/°C).
Calibration: Calibration Test Excitation is 10 VDC; Standard Calibration is 5-point Compression, CW; Available Calibration includes 5-point Tension and Compression, CW and CCW; Shunt Calibration Value varies by capacity.

Model MTA500

Low Profile Thrust and Moment Load Cell with active and fixed ends.

Capacities and Dimensions

Capacities range from 250 lb to 5000 lb for Fz and 100 in-lb to 1000 in-lb for Mx, My.
Deflection and Natural Frequency are specified for each capacity.
Rated Output is given in mV/V.
Dimensions and connector details are provided, including BENDIX 6-PIN receptacle specifications.

Catalog excerpts

ADVANCED SENSOR TECHNOLOGY, INC. FEATURES • Used for quantification of test stand misalignment • Used for measurement of wind tunnel model aerodynamics • Can Measure Force via Moment Arms SPECIFICATIONS PERFORMANCE Nonlinearity (Mx, My) Nonlinearity (Fz) Cross Talk ELECTRICAL Rated Output (RO) Excitation (VDC or VAC) Bridge Resistance Insulation Resistance Connection Connector Code MECHANICAL Safe Overload Material (flexure) See chart on next page 18 max Mx/My: 350 Ohm nom; Fz: 700 Ohm nom >500 MOhm @ 50 VDC (3) 6 pin BENDIX receptacle (PT02E-10-6P) CC1 My r 1 \ Mx CCWCOMP CW IP Rating TEMPERATURE Operating Temperature Compensated Temperature Temperature Shift Zero Temperature Shift Span CALIBRATION Calibration Test Excitation Calibration (standard) Calibration (available) Shunt Calibration Value -60 to 200°F (-51 to 93°C) 60 to 160°F (15 to 72°C) ±0.01% of RO/°F (0.018% of RO/°C) ±0.01% of Load/°F (0.018% of Load/°C) 10 VDC 5-pt Compression, CW 5-pt Tension and Compression, CW and CCW 200 kOhm (250 lb, 500 lb, 1000 lb) 100 kOhm (5000 lb, 100 in-lb, 200 in-lb, 400 in-lb, 1000 in-lb) Sensor Solution Source Load - Torque - Pressure - Multi-Axis - Calibration - Instruments - Software

Open the catalog to page 1

Sensor Receptacle View CAPACITIES lb in-lb Deflection (in) Natural Frequency (Hz) (Fz) (Mx, My) (Fz only) (Fz only) Drawing Number: FI1008-H FUTEK reserves the right to modify its design and specifications without notice. Please visit www.futek.com/salesterms for complete terms and conditions.

Open the catalog to page 2

MTA500 series

MTA500 series

Catalog excerpts

All FUTEK Advanced Sensor Technology, Inc. catalogs and technical brochures

Archived catalogs