FUTEK ADVANCED SENSOR TECHNOLOGY, INC. FEATURES • Light weight • For use in both tension and compression • Low profile • Easy to integrate on flat loading surfaces • High accuracy -60 to 200°F [-51 to 93°C] 60 to 160°F [16 to 71°C] ±0.005% of RO/°F [0.01% of RO/°C] ±0.005% of Load/°F [0.01% of Load/°C] SPECIFICATIONS PERFORMANCE Nonlinearity Hysteresis Nonrepeatability Creep ELECTRICAL Rated Output (RO) Excitation (VDC or VAC) Bridge Resistance Insulation Resistance Connection Connector Code MECHANICAL Weight (approximate) Safe Overload Material IP Rating TEMPERATURE Operating Temperature Compensated Temperature Temperature Shift Zero Temperature Shift Span CALIBRATION Calibration Test Excitation Calibration (standard) Calibration (available) Shunt Calibration Value 2 mV/V nom 18 max 350 Ohm nom >500 Mohm @ 50 VDC 4 Pin LEMO Receptacle CC4 2 oz (200-300 lb) [56.7g] 5 oz (500-1000 lb) [141g] 150% of RO Aluminum, Red Anodized IP40 10 VDC 5-pt tension Tension and Compression 60.4 kOhm Sensor Solution Source Load - Torque - Pressure - Multi-Axis - Calibration - Instruments - Software ^ JJ, MlSOg J-i>J tf.fr 9001 & \ KISOk -*■» tf.fr 13485 U.S. Manufacturer

0.50 [12.6] LOADING SURFACE (TOP & BOTTOM) LEMO RECEPTACLE EGG.0B.304.CLL MATING CONNECTOR FGG.0B.304.CLAD35 (NOT INCLUDED) Natural Deflection Frequency (in) (Hz) Drawing Number: FI1434 FUTEK reserves the right to modify its design and specifications without notice. Please visit www.futek.com/salesterms for complete terms and conditions. 10 Thomas, Irvine, CA 92618 USA Tel: (949) 465-0900 Fax: (949) 465-0905