FUTEK ADVANCED SENSOR TECHNOLOGY, INC. Wiring/Connector Code MECHANICAL Weight (approximate) Safe Overload Deflection Material IP Rating TEMPERATURE FEATURES • Fully internally temperature compensated (no external conditioning circuitry) • Subminiature / light weight • Low deflection / fast response • 17-4 PH stainless-steel construction • For use in compression • Utilizes metal foil strain gauge technology • Bottom cable exit >500 MOhm @ 50 VDC #29 AWG, 4 conductor, spiral shielded silicone cable 10-ft [3 m] long WC1 Operating Temperature Compensated Temperature Temperature Shift Zero Temperature Shift Span CALIBRATION Calibration Test Excitation Calibration (standard) Shunt Calibration Value | | Non-loading surface, do not contact | | Active End -60 to 200°F (-50 to 93°C) 60 to 160°F (15 to 72°C) ±0.01% of RO/°F (±0.018% of RO/°C) ±0.02% of Load/°F (±0.036% of Load/°C) Sensor Solution Source Load - Torque - Pressure - Multi-Axis - Calibration - Instruments - Software www.futek.com

Bridge Sensor XXXΩ – Voltage (Green/Yellow) WIRING CODE (WC1 WITH SHIELD) Power Supply (Red) + RED Bridge Sensor BLACK + SIGNAL+ Current (Green/Yellow) Bridge Sensor XXXΩ – Excitation (Black/Blue) SUPPORT OUTER RING – Signal (White) Shield (Floating) DO NOT APPLY LOAD ON COVER Ø 0.13 [Ø 4.8] nom SPRING STRAIN RELIEF Drawing Number: FI1258-C FUTEK reserves the right to modify its design and specifications without notice. Please visit http://www.futek.com/salesterms for complete terms and conditions. 10 Thomas, Irvine, CA 92618 USA Tel: (949) 465-0900 Fax: (949) 465-0905