• Fully internally temperature compensated, eliminating the need for external conditioning circuitry.
• Subminiature and lightweight design.
• Low deflection and fast response time.
• Constructed from 17-4 PH stainless steel for durability.
• Designed for use in compression applications.
• Utilizes metal foil strain gauge technology.
• Compliant with RoHS directive 2011/65/EU.
• Compatible accessories and related instruments available.

• Performance: Nonlinearity and hysteresis are both ±0.5% of Rated Output (RO), with nonrepeatability at ±0.1% of RO.
• Electrical: Rated Output is 2 mV/V, with a maximum excitation of 7 VDC or VAC. Bridge resistance is 350 Ohm nominal, and insulation resistance is ≥500 MOhm at 50 VDC.
• Mechanical: Weighs approximately 0.3 oz (8.5g) with a safe overload capacity of 150% of RO. Deflection is nominally 0.0005 in (0.013 mm).
• Temperature: Operating temperature ranges from –60 to 200°F (–51 to 93°C), with compensated temperature between 60 to 160°F (16 to 71°C). Temperature shift zero and span are both ±0.02% of RO/°F.
• Calibration: Standard calibration includes a 5-point compression test with a shunt calibration value of 60.4 kOhm and 100 kOhm for 1000 g and 5 lb capacities.
• Conformity: Adheres to RoHS 2011/65/EU and CE standards EN55011:2009 and EN61326-1:2006.

The Miniature Load Button is designed with a non-loading surface and features an active end and fixed end. It is important not to apply load on the surface support outer ring.

Detailed dimensions are provided in inches and millimeters, with specific notes on cable support and epoxy fillet support.

• Available in various capacities ranging from 1000 g to 50 lb, with corresponding natural frequencies from 20 kHz to 52 kHz.

• Red: + Excitation
• Black: – Excitation
• Green: + Signal
• White: – Signal
• Shield: Sensor Body