MODEL LCF555 Pancake Load Cell with Tension Base – High Capacity

1 / 2 PagesView full catalog

MODEL LCF555 Pancake Load Cell with Tension Base – High Capacity

Product catalog summary

Features

Low profile design
Constructed from 17-4 stainless steel
Suitable for both tension and compression applications
Employs metal foil strain gauge technology

Specifications

Performance: Nonlinearity and hysteresis are ±0.2% of Rated Output (RO); Nonrepeatability is ±0.02% of RO.
Electrical: Rated Output is 4 mV/V nominal; Maximum excitation is 20 VDC or VAC; Bridge resistance is 350 Ohm nominal; Insulation resistance is ≥500 MOhm at 50 VDC; Connection via 6 Pin BENDIX Receptacle (PT02A-10-6P).
Mechanical: Approximate weight is 50 lb (22.7 kg); Safe overload is 150% of RO; Deflection is 0.002 in (0.05 mm) nominal; Material is 17-4 PH stainless steel; IP Rating is IP64.
Temperature: Operating temperature range is -60 to 200°F (-50 to 93°C); Compensated temperature range is 60 to 160°F (15 to 72°C); Temperature shift zero is ±0.001% of RO/°F (0.0018% of RO/°C); Temperature shift span is ±0.002% of Load/°F (0.0036% of Load/°C).
Calibration: Calibration test excitation is 10 VDC; Standard calibration is 5-point compression; Available calibration is 5-point tension; Shunt calibration value is 30 kOhm.

Model Information

Model: LCF555 Pancake Load Cell with Tension Base – High Capacity
Active and fixed ends are specified
Dimensions and capacities are provided for different item numbers, with a natural frequency of 8300 Hz and thread specifications.

Connection Details

BENDIX 6-PIN (CC1) connection with pin color descriptions: A (Red) + Excitation, B (Black) – Excitation, C (Green) + Signal, D (White) – Signal, E (Orange) + Sense, F (Blue) – Sense.

Additional Information

FUTEK reserves the right to modify design and specifications without notice.
For complete terms and conditions, visit www.futek.com/salesterms.

Catalog excerpts

MODEL LCF555 Pancake Load Cell with Tension Base – High Capacity-1

ADVANCED SENSOR TECHNOLOGY, INC. SPECIFICATIONS PERFORMANCE Nonlinearity Hysteresis Nonrepeatability ELECTRICAL Rated Output (RO) Excitation (VDC or VAC) Bridge Resistance Insulation Resistance FEATURES • Low profile design • 17-4 stainless-steel construction • For use in both tension and compression • Utilizes metal foil strain gauge technology Connection 6 Pin BENDIX Receptacle (PT02A-10-6P) Weight (approximate) Safe Overload Deflection Material IP Rating TEMPERATURE Temperature Shift Zero ±0.001% of RO/°F [0.0018% of RO/°C] Temperature Shift Span ±0.002% of Load/°F [0.0036% of Load/°C] CALIBRATION Calibration Test Excitation 10 VDC Calibration (standard) 5-pt compression Calibration (available) 5-pt tension Shunt Calibration Value 30 kOhm

Open the catalog to page 1

MODEL LCF555 Pancake Load Cell with Tension Base – High Capacity-2

Natural Frequency Thread (Hz) Dual Bridge Sensor Receptacle View Drawing Number: FI1099-G FUTEK reserves the right to modify its design and specifications without notice. Please visit www.futek.com/salesterms for complete terms and conditions. 10 Thomas, Irvine, CA 92618 USA Tel: (949) 465-0900 Fax: (949) 465-0905 www.futek.com

Open the catalog to page 2