*mydirectindustry

MBA400 series

1 / 2 PagesView full catalog

MBA400 series

Product catalog summary

Features

Measures Fx and Fy loads, suitable for high-speed planar force measurements in automation systems.
Ideal for embedded automotive and aircraft control stick force measurement.

Specifications

Performance: Nonlinearity of ±0.1% of Rated Output (RO).
Electrical: Rated Output of 2 mV/V for 50 lb and 3 mV/V for 200 lb, with a maximum excitation of 18 VDC or VAC. Bridge resistance is 350 Ohm, and insulation resistance is ≥500 MOhm at 50 VDC. Connection via a 4 Pin LEMO receptacle (Connector Code CC4).
Mechanical: Weighs approximately 16 oz (454 g), with a safe overload capacity of 150% of RO. Made of stainless steel with an IP rating of IP50.
Temperature: Operating temperature ranges from -60 to 200°F (-51 to 93°C), with compensated temperature from 60 to 160°F (15 to 72°C). Temperature shift zero is ±0.025% of RO/°F (0.045% of RO/°C), and temperature shift span is ±0.01% of Load/°F (0.018% of Load/°C).
Calibration: Calibration test excitation is 10 VDC, with standard 5-point tension calibration and available compression calibration. Shunt calibration values are 60.4 kOhm for 50 lb and 43.575 kOhm for 200 lb.
Conformity: Complies with RoHS 2011/65/EU and CE standards EN55011:2009; EN61326-1:2006.

Model Information

Model MBA400 Biaxial Load Arm with non-loading surface and active end.
Dimensions and capacities include deflection and natural frequency for different item numbers (FSH03934 and FSH04054).

Connection Details

LEMO 4-PIN (CC4) connection with pin color descriptions: Red (+ Excitation), Green (+ Signal), White (– Signal), Black (– Excitation).

Additional Information

FUTEK reserves the right to modify design and specifications without notice. Visit their website for complete terms and conditions.

Catalog excerpts

ADVANCED SENSOR TECHNOLOGY, INC. >500 MOhm @ 50 VDC 4 Pin LEMO receptacle EGG.0B.304.CLL CC4 FEATURES • Measures Fx and Fy loads • Ideal for high speed planar force measurements for automation systems • Ideal for embedded automotive and aircraft control stick force measurement MECHANICAL Weight (approximate) Safe Overload Material Non-loading surface, do not contact Active End Fixed End IP Rating TEMPERATURE Operating Temperature Compensated Temperature Temperature Shift Zero Temperature Shift Span CALIBRATION Calibration Test Excitation Calibration (standard) Calibration (available) Shunt Calibration Value CONFORMITY RoHS CE -60 to 200°F (-51 to 93°C) 60 to 160°F (15 to 72°C) ±0.025% of RO/°F (0.045% of RO/°C) ±0.01% of Load/°F (0.018% of Load/°C) Sensor Solution Source Load • Torque • Pressure • Multi-Axis • Calibration • Instruments • Software www.futek.com ROHS §ISO$?

Open the catalog to page 1

4 X #8-32 X 0.25 [6.4]DEEP EQUALLY SPACED ON 1.250 [31.8] B.C.D. (FAR SIDE) Align with key 2 x 0.345 FLAT [8.8] Sensor Receptacle View 0.70 [17.9] 0.35 (REF LOADING POINT) 3.32 [84.3] (2) LEMO RECEPTACLE EGG.OB.304.CLL MATING CONNECTOR FGG.OB.304.CLAD35 (NOT INCLUDED) Drawing Number: FI1230-B FUTEK reserves the right to modify its design and specifications without notice. Please visit www.futek.com/salesterms for complete terms and conditions. 10 Thomas, Irvine, CA 92618 USA Tel: (949) 465-0900 Fax: (949) 465-0905

Open the catalog to page 2

All FUTEK Advanced Sensor Technology, Inc. catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list