*mydirectindustry

IHH500

Product catalog summary

Overview: The IHH500 is a digital hand-held display device designed for various sensor applications including load, torque, pressure, and multi-axis measurements. It features advanced functionalities such as speed/power measurement, bridge resistance measurement, and shunt calibration.

Key Features:

Speed and power measurement capabilities.
Bridge resistance measurement and shunt calibration.
First peak/valley detection and user-friendly navigation menu.
Universal unit conversion and IEEE1451.4 standard support.
USB and ASCII stream output with selectable voltage and current output configurations.

Display Specifications:

16x4 character LCD with adjustable height and brightness.
Auto power-off feature and contrast adjustment.

Technical Specifications:

Data logging capacity of 21k points and profile storage for 14 profiles.
Sampling rate ranges from 5 to 4800 SPS with a bandwidth of sampling rate divided by 4.
Internal resolution of 24 bits with integrated digital filter for 50/60 Hz rejection.
IP64 rating for dust and water resistance.

Input and Output Specifications:

Encoder input supports quadrature leading and lagging pulse with speed measurement up to 150k pulses per second.
Strain gauge mV/V input with precision bridge excitation of 5.000 VDC.
Voltage input range of ±12 VDC and current input range of 0-30 mA.
Analog voltage output of 0–5 or ±5 VDC and analog current output options.
Two individual relay outputs and external supply output of 24 VDC at 100 mA max.

Conformity and Standards:

Complies with RoHS EU 2015/863 and CE standards EN55011 and EN61326-1.
UN38.3 compliance for transportation safety.

Connectors and Wiring:

Detailed pin configurations for power, output, USB, and sensor connections.
Instructions for grounding and avoiding potential ground loops.

Included Accessories:

Power supply adaptor, SENSIT software, USB cable, analog/relay output cable, and a Pelican case.

Dimensions: The device measures 4.0 x 6.0 x 1.7 inches (101.24 x 153.43 x 43.61 mm).

Catalog excerpts

Digital Hand Held Display Elite SPECIFICATIONS GENERAL Speed/Power Measurement Bridge Resistance Measurement Keypad Options (Track/Hold, Peak/Valley Reset, Unit, Tare/ Gross, Shunt, Battery, Display, Menu) Data Logging Profile Storage Sampling Rate Internal Resolution Resolution (Noise Free) Integrated Digital Filter Internal Shunt Resistance Value Readout Nonlinearity ENCODER INPUT Supply Voltage Encoder Input Quadrature Leading and Lagging Pulse (TTL) Speed Measurement First Peak/First Valley Feature Angle/Speed Measurement (Update Rate) User Friendly Navigation Menu STRAIN GAUGE mV/V INPUT Shunt Calibration Bridge Excitation Universal Unit Conversion Standard Input Range Supports IEEE1451.4 Standard (TEDS Templates 30 & 33) Optional Input Range Reading Error** ASCII Stream Output VOLTAGE INPUT Selectable Voltage and Current Output Configuration Standard Input Range Reading Error** 16 × 4 character LCD with Selectable Height (0.18 [4.75] and 0.49 [12.55]) 6 Digit Display Plus Sign and Decimal Point or 7 Digit Plus Sign Depending On Application CURRENT INPUT Standard Input Range OUTPUT Analog Voltage Minimum Load Impedance (Voltage) Analog Current Auto Power-off Maximum Load Impedance (Current) Brightness and Contrast Adjustment 2 Individual Relay Outputs External Supply Output Digital Packetized Data ASCII Output Update Rate IMPORTANT NOTE: ONLY CONNECT DEVICE TO USB 2.0 PORT CONFORMITY RoHS *Refer to IHH500 User Manual for conditions on analog output bandwidth. Sensor Solution Source **When no system calibration is performed. Load · Torque · Pressure · Multi-Axis · Calibrati

Open the catalog to page 1

CONNECTORS & WIRING –Excitation, TEDS return TEDS Data GND_OUT Ground/Shield –V and –mA Amplified Input Connections +V and +mA Amplified Input Connections Leading pulse from sensor (Elite Version Only) Lagging pulse from sensor (Elite Version Only) Note: These pins are not polarity sensitive. USB PORT CONNECTIONS (COMPATIBLE WITH USB 2.0 ONLY) PIN analog current output signal analog voltage output return solid state relay 1 (positive) analog voltage output signal solid state relay 2 (positive) analog current output return solid state relay 1 (negative) solid state relay 2 (negative) Sensor Solution...

Open the catalog to page 2

CONNECTORS & WIRING CONNECTORS # POWER CONNECTOR MATING CONNECTOR OUTPUT CONNECTOR SENSOR CONNECTOR For wiring diagram instructions please review the product manual. Note: Shield should be connected to cable clamp of binder cable assembly when connecting on instrument side. Sensor cable shield connections should be grounded on one end, either the sensor side or the instrument side, to avoid potential ground loops. SAMPLING RATE SAMPLES PER SECOND (SPS) Sensor Solution Source Load · Torque · Pressure · Multi-Axis · Calibration · Instruments · Software

Open the catalog to page 3

INCLUDED ACCESSORIES ITEM # IHH500 Power Supply Adaptor SENSIT Software IHH500 Analog/Relay Output Cable Binder Male Plug with Cable Clamp Pelican Case Drawing Number: FI1444-E FUTEK reserves the right to modify its design and specifications without notice. Please visit http://www.futek.com/salesterms for complete terms and conditions. 10 Thomas, Irvine, CA 92618 USA Tel: (949) 465-0900 Fax: (949) 465-0905

Open the catalog to page 4

All FUTEK Advanced Sensor Technology, Inc. catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list