FUTEK ADVANCED SENSOR TECHNOLOGY, INC. Common Mode Rejection Ratio FEATURES • Uni-directional/Bi-directional Output, Differential Input • 4-20 mA Output 43.7kn, 60.4kn, 87.6kn, 100kn, 150kn, 300kn, 432kn (DIP Switch) • Externally Accessible Shunt Cal Activation Button • Digitallly Controlled Remote Shunt • Internal Span and Offset Potentiometers • Sensor Polarity Reversal DIP Switch • Zero Shift DIP Switch • Class 1 Certification for Aerospace and Medical Grade Devices Output Span range Output Zero range Gain Drift with Temperature Zero Drift with Temperature Operating Temperature Storage Temperature Relative Humidity PHYSICAL FEATURES hap-p % of FSR % of FSR PPM of FSR % of FSR PPM of FSR °F [°C] °F [°C] °F [°C] Material Stainless steel cover with aluminum body fastened by magnets IMPORTANT NOTE: DO NOT CONNECT DEVICE TO POWER SUPPLY WHEN POWER SUPPLY IS ALREADY ON Power LED Indicated Class 1 Certification for Aerospace and Medical Grade Devices 1 Stand-alone current consumption. Adding the strain gauge and output current will increase current consumption 2 Only for Sensitivity of 1.0 mV/V or Greater 3 Only for Sensitivity of 1.5 mV/V or Greater 4 350 Ohms for 5 V excitation and 75 Ohms for 10 V excitation Sensor Solution Source Load - Torque - Pressure - Multi-Axis - Calibration - Instruments - Software www.futek.com ROHS & \ KlSOg ■*»

Model IAA200 2 DIP SWITCHES CONFIGURATION 0000 SENSOR SIDE PIN # WIRING CODE 1 + EXCITATION2 + SIGNAL3 - SIGNAL4 - EXCITATION/SHIELD4 4 For 6 wire sensors, connect +SENSE to + EXCITATION and -SENSE to -EXCITATION. Note: Sensor cable shield connections should be grounded on one end, either the sensor side or the IAA sensor input side, to avoid potential ground loops. POWER SIDEPIN WIRING CODE COLOR 1 +Vin Power Supply Red 5 Vout/Iout Output Signal Green Power is 12.5VDC to 26VDC. Note: All grounds are connected together and pass through. Power and instrument cable shield connections...