*mydirectindustry

FSH03631

Product catalog summary

Overview: The USB320 model by FUTEK is a sensor solution designed for load, torque, pressure, and multi-axis measurements. It features USB 2.0 communication, is bus-powered, and offers short circuit protection. The device supports both voltage and current sensors and is CE approved.

Specifications:

General: The device has a sampling rate of up to 4800 SPS, with a bandwidth of sampling rate divided by 4. It offers a 24-bit internal resolution and a non-linearity of ±0.005% of FSR. It includes a digital filter for 50 Hz/60 Hz rejection and has on-chip memory of 1 kilobyte, capable of storing up to 16 calibration points. The device weighs approximately 10 grams and has an IP rating of IP50.
Strain Gauge mV/V Input: It provides a bridge excitation of 12 VDC and supports a standard input range of ±10 VDC or 4-20 mA, with an optional input range up to ±400 mV/V.
Voltage Type (FSH03631): Offers a power output of 12 VDC/1W and a voltage input of ±10 VDC, powered by a USB bus (5 VDC ± 5%).
Current Type (FSH03634): Provides a power output of 12 VDC/1W with a current input of 0-30 mA, powered by a USB bus (350 mA).

Environmental Conditions: The operating temperature ranges from -13°F to 185°F (-25°C to 85°C), and the storage temperature ranges from -40°F to 257°F (-40°C to 125°C).

Conformity: The device complies with RoHS 2011/65/EU and CE EN 61326-1:2006 standards.

Dimensions: The document provides detailed dimensions in inches and millimeters, along with pin configurations for connectors.

LED Indicators: The device features LED indicators for module auto-calibration, normal operation, USB power, and USB data link.

Sampling Rate and Resolution: The resolution varies with the sampling rate, ranging from 19 noise-free bits at 5 SPS to 13.5 noise-free bits at 4800 SPS.

Accessories: The SENSIT Software (FSH03189) is available for a 14-day trial, offering features like data logging and graphing. A license is required after the trial period.

Catalog excerpts

ADVANCED SENSOR TECHNOLOGY, INC. FEATURES • USB 2.0 Communication Link • USB Bus-Powered • Input/Output Short Circuit Protection • Streaming ASCII Output • CE approved • Supports Voltage Sensors (FSH03631) • Supports Current Sensors (FSH03634) IMPORTANT NOTE: ONLY CONNECT DEVICE TO USB 2.0 PORT SPECIFICATIONS GENERAL Sampling Rate Bandwidth (Hz) Internal Resolution Resolution (Noise Free) Non Linearity Output Integrated Digital Filter On Chip Memory Stored Calibration Weight IP Rating STRAIN GAUGE mV/V INPUT Bridge Excitation Standard Input Range Optional Input Range VOLTAGE TYPE (FSH03631) Power Output Voltage Input Power Supply CURRENT TYPE (FSH03634) Up to 4800 SPS Sampling Rate (SPS) / 4 24 bits Power Output Current Input Power Supply CONNECTORS Sensor Connector Mating Connector 1 Speed = A a x 60 / PPR 2 1W power output 3 For 0-30 mA use item FSH03634; for 10 VDC use FSH03631 Sensor Solution Source Load • Torque • Pressure • Multi-Axis • Calibration • Instruments • Software www.futek.com RoHS & \ KlSOg ■*»

Open the catalog to page 1

Model USB320 2 SPECIFICATIONS (continued) LED INDICATORS Blinking blue (10 Hz) Module Auto-Calibration Blinking blue (1 Hz) Module Normal Operation Green USB Power Red USB Data Link ACCESSORIES • SENSIT Software (FSH03189) 14 Day Trial - /Available to download on FUTEK website. A license is required, per seat, after 14 days to benefit the features such as data logging, graphing, etc. Trial version turns into basic read-out ONLY after 14 days and a product key is required to enable the features. Drawing Number: FI1380-B FUTEK reserves the right to modify its design and...

Open the catalog to page 2

All FUTEK Advanced Sensor Technology, Inc. catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list