*mydirectindustry

JTH2200R-Ⅲ

1 / 2 PagesView full catalog

JTH2200R-Ⅲ

Product catalog summary

Drilling Coverage and Specifications

Model JTH3200R-Ⅲ

Dimensions & Performance: The model weighs 44 tons with a boom length ranging from 10,100 mm to 3,800 mm. It features a hydraulic drifter HD220 with three units and a guide shell GH833-Ⅱ with three units. The boom lift angle is +36° to -30°, and the boom swing angle is 35° to the left and right.
Drilling Coverage: The drilling coverage is 13,220 mm in width and 8,840 mm in height. The charging cage working coverage is 16,940 mm by 9,950 mm.
Engine & Carrier: Equipped with a 4-cycle, 4-cylinder diesel engine, model QSB4.5, manufactured by Cummins Diesel, with a rated output of 119 kW at 2,500 min-1. The driving type is 4-wheel drive with a hydro-static transmission.
Electric Equipment: The total required input is over 255 kVA, with electric motors for the power pack, air compressor, and booster pump.

Model JTH2200R-Ⅲ

Dimensions & Performance: This model weighs 35.5 tons with similar boom specifications as the JTH3200R-Ⅲ but with two units each for the hydraulic drifter and guide shell.
Drilling Coverage: The drilling coverage is slightly smaller at 12,770 mm by 8,490 mm, with a charging cage working coverage of 16,490 mm by 9,800 mm.
Engine & Carrier: Similar engine specifications as the JTH3200R-Ⅲ, with a traveling speed of up to 11 km/h and a minimum turning radius of 2,600 mm inside and 7,100 mm outside.
Electric Equipment: Requires a total input of over 170 kVA, with electric motors for the power pack, air compressor, and booster pump.

General Notes:

Both models feature automatic parallel holding as standard and have similar electric equipment specifications, including voltage requirements and cable reel types.
FRD Furukawa reserves the right to change specifications without prior notice.

Catalog excerpts

Hydraulic Wheel Jumbo with HD220 Hydraulic drifter 3 boom ＆ 2 cage ■ Specifications Ｍｏｄｅｌ Dimension & performance Weight Hydraulic drifter Guide shell Boom Charging cage Drilling coverage （width x height） Charging cage working coverage（width x height） Guide shell （feed length） Overall length Overall width Overall height Traveling speed Gradeability Min. turning radius （inside / outside） Guide shell GH833 Type Length Feed length Rod length Boom JE331-Ⅳ Boom length （Max / Min） Boom lift angle Guide shell tilt angle Guide shell dump angle Boom slide length Guide shell slide length Guide shell swing angle Boom swing angle Guide shell rotary angle Automatic parallel holding ＪＴＨ３２００Ｒ-Ⅲ 44 ton HD220 x 3 units GH833-Ⅱ x 3 units JE331-MARK4 x 3 units ZN720 x 2 units 13,220 mm x 8,840 mm 16,940 mm x 9,950 mm for 3.3m 14,310mm FRD Furukawa reserves right to change specifications without prior notice. 1-5-3, Nihonbashi, Chuo-ku, Tokyo 103-0027, Japan Phone +81-3-3231-6982 Fax +81-3-3231-6994 Ｍｏｄｅｌ Charging cage ZN720 Boom length （Max / Min） Boom lift angle Boom swing angle Boom slide length Cage tilt angle Cage swing angle Max. loading capacity Automatic parallel holding Engine & Carrier Type Model Manufacturer Rated output Driving type Transmission Brake Working brake Parking brake Emergency brake Steering Type Outrigger Type Electric equipment Starting method for motor Total required input Electric motor for power pack Electric motor for air compressor Electric motor for booster pump Voltage Cable reel type Electric-cable length Outside diameter Delivery water capacity ＪＴＨ３２００Ｒ-Ⅲ 10,100 mm / 3,800 mm + 36°～ - 30° Left 35°～ Right 35° 6,300 mm + 33°～ - 38° Left 35°～ Right 35° 250 kg Standard 4 cycle, 4cylinders, diesel engine QSB4.5 （EU/StageⅢA, EPA/Tire-3） Cummins Diesel 119 kW / 2,500 min-１ 4 wheel drive Hydro-Static Transmission （HST） Air-over hydraulic 4 wheel disc brake Mechanical brake Air pressure drops or engine stops Rear axle power steering Hydraulic cylinder vertical hold Star - delta 255 kVA over 55 kW x 3 7.5 kW 7.5 kW A

Open the catalog to page 1

Hydraulic Wheel Jumbo with HD220 Hydraulic drifter 2 boom ＆ 2 cage ■ Specifications Ｍｏｄｅｌ Dimension & performance Weight Hydraulic drifter Guide shell Boom Charging cage Drilling coverage （width x height） Charging cage working coverage（width x height） Guide shell （feed length） Overall length Overall width Overall height Traveling speed Gradeability Min. turning radius （inside / outside） Guide shell GH833 Type Length Feed length Rod length Boom JE331-Ⅳ Boom length （Max / Min） Boom lift angle Guide shell tilt angle Guide shell dump angle Boom slide length Guide shell slide length Guide shell swing...

Open the catalog to page 2

All Furukawa Rock Drill catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list