*mydirectindustry

FTH1AM-709

Product catalog summary

Overview: The Furukawa FTH1AM-709 is a middle-sized fan cut drill rig designed for small and medium-sized production drilling in underground mines. It is suitable for drilling holes ranging from 64 to 89 mm in diameter and can reach depths over 30 meters. The machine is equipped with a newly developed rod-changer and a durable boom system adaptable to various drilling applications.

Engine and Drive System: The drill rig is powered by a KUBOTA engine that complies with Tier 4 EU/stage IIIA emission standards. It features a hydrostatic transmission (HST) drive system, allowing for a gradeability of 15 degrees and a maximum travel speed of 9.0 km/h. The machine is designed to be operated similarly to a car.

Hydraulic Drifter: The FTH1AM-709 is equipped with the HD709 hydraulic drifter, developed specifically for fan cut and ring drilling. It operates using hydraulic pressure generated by a 55 kW electric motor.

Specifications: The drill rig has an operating weight of 15,000 kg and dimensions of 7,360 mm in length, 2,000 mm in width, and 2,500 mm in height with the operator roof lowered. It features a 4-cycle, 4-cylinder, water-cooled diesel engine with a rated output of 55.4 kW at 2,400 min-1. The machine has a 4-wheel drive system with a hydrostatic transmission, allowing for a traveling speed of 0 to 8.5 km/h and a minimum turning radius of 5,800 mm outside and 2,900 mm inside.

Drilling Capabilities: The drill rig supports a drill hole range of φ64 to φ89 mm and is equipped with a dual damping system. The rod changer can handle 21 rods, each 1,220 mm in length with a T38-MF thread.

Additional Features: The machine includes an articulated chassis with power steering, a hydraulic cylinder boom with a vertical hold, and various electric motors for different functions, including a 55 kW motor for the power pack and a 22 kW motor for the air compressor. The water supply rate is 160 liters per minute at 0.1-0.4 MPa.

Note: Specifications are subject to change without prior notice.

Catalog excerpts

■ Fan cut drill machine of the middle size Furukawa FTH1AM-709 is middle-sized Fan cut drill rig in the hole range64～89mm, over 30m depth for small and medium size production drilling in underground mines. Equipped with the newly-developed reliable Rod-changer and the durable and suitable boom system to various drilling applications. Guide slide Ｍｏｄｅｌ Total weight Overall length Impact oil pressure Impact rate Rotation speed Shank rod thread Drill hole range Damping system ■ Ｔｉｅｒ４ Low-emission engine Powerful KUBOTA engine is fully compliant with Tier4 EU/stageⅢA ■ HST Drive (Hydro-Static Trans-mission) F

Open the catalog to page 1

Ｍｏｄｅｌ General Engine＆Power line Operating weight Hydraulic Drifter Overall length Overall width Overall height(operator roof lowered) Wheelbase Traveling speed Gradeability Min.turning radius(Outside) Min.turning radius(Inside) ZC14635 Guide shell Overall length Feed length Rod length ZC14635 Boom Boom length (minimum) Boom lift angle Guide tilt angle Guide rotary angle Guide slide length Top anchor slide length Bottom anchor slide length Parallel Drilling ZC14635 Rod changer Rod quantity Rod length Engine type 4cycle,4cylinders,Water cooled diesel Model V3307-DI-T Manufacturer KUBOTA Rated output...

Open the catalog to page 2

All Furukawa Rock Drill catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list