FCO99 - Calibrated Leaks

Product catalog summary

Overview: The FCO99 series of calibrated leaks are designed for use with production line pressure decay and flow type leak detectors. These devices are made from compressed brass and maintain a constant leak rate at a specified test pressure, provided they remain uncontaminated.

Specifications:

Dimensions: 42mm long, 19mm across flats, 1/8” BSP female connector.
Accuracy: ± 5%
Repeatability: 0.1%
Materials: Stainless steel, phosphor bronze in contact with test pressure.
Weight: 73 grams
Traceability: Traceable to UK national standards.

Applications: Primarily used for calibrating production line leak detectors.

Models and Leak Rates:

FCO99-1: 20CC/HR @ 150 MBAR
FCO99-2: 1CC/MIN @ 1 BAR
FCO99-3: 1CC/MIN @ 2 BAR
FCO99-4: 2CC/MIN @ 4 BAR
FCO99-5: 3CC/MIN @ 6 BAR
FCO99-6: 5CC/MIN @ 8 BAR
FCO99-7: 6CC/MIN @ 10 BAR
FCO99-8: 10CC/MIN @ 12 BAR
FCO99-9: 10CC/MIN @ 14 BAR

Calibration and Testing: The FCO99 can be checked using the Furness Controls FCO210 Microcalibrator. Other leak rate and test pressure combinations may be available upon request.

Contact Information: Furness Controls, Beeching Road, Bexhill, East Sussex, UK. TN39 3LJ. Tel: +44 1424 730316, Fax: +44 1424 730317, Email: [email protected], Website: www.furness-controls.com

Additional Information: Furness Controls has a UKAS certified laboratory offering pressure calibrations from 0 to 40 kPa and flow from 2 ml/min to 2000 litres/min.

Catalog excerpts

• Dimensions: 42mm long, 19mm across Flats, 1 /8” BSP female connector • Applications: Calibrating Production Line Leak Detect

Open the catalog to page 1

Description The FCO99 series of calibrated leaks are designed to connect to production line pressure decay and flow type leak detectors. The calibrated leak device uses compressed brass material to pre-set a leak rate at a certain test pressure. As there are no moving parts the device remains constant at a set pressure provided it is not contaminated by oil, dirt or water. FCO99 Calibrated Leaks can be checked using the Furness Controls FCO210 Microcalibrator. Other leak rate and test pressure combinations may be possible. Please ask Furness Controls for information on ranges available. Diagram...

Open the catalog to page 2

All Furness Controls catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list