Product sheet AFSU_EN
8Pages

Exhaust rails for rescue vehicles FUMEX exhaust fume rails for emergency vehicles are constructed with load-bearing aluminium profiles and integrated guide rail. The exhaust fume rail is equipped with special fixed brackets which can easily be mounted to walls or ceilings. AFSA is a simple exhaust for shorter vehicles with low-mounted exhaust pipes, such as ambulances. AFSH is an optimal solution for longer vehicles with low-mounted exhaust pipes, such as turntable trucks. AFSU is for vehicles with highmounted exhaust pipes, such as fire engines. The chain suspension of the rail means simpler installation and is easily adjustable for different vehicle heights. The design also facilitates completely automatic function at turnout and approach. The rails can be equipped with various automatic solutions, including start and stop of fans and automatic nozzle disconnection. The Fumex range also includes fans, accessories and filters suitable for exhaust extractors EXHAUST EXTRACTOR Pure advantage

Profile rail Made from anodised aluminium with integrated guide rails. End stops with dampers made from yellow chromate steel. Made from yellow chromate steel with 5 ball-bearing wheels. Balancing block Balancing block in reinforced polyamide, inversely progressive with 4.5 m wire and bracket for trolley. Heat-resistant, rubberised fabric in EPDM/polyester. Coil, polyamide. Hose length, 7 m. Hose breakage protection Shock-resistant, manufactured in EPDM rubber. Protects the hose against heavy loads without the hose, nozzle or vehicle being damaged. Special, stable brackets are available for...

Nozzle and automatic control device suitable for AFSA Pneumatic nozzle For automatic disconnection at turnout. Pressurised manually at approach with a rubber sleeve to seal around the exhaust pipe. Also has compressed air unit for automatic control devices, AFSA 810A. For automatic disconnection at turnout. Unit for automatic control devices is inclu ded, and supplied complete with regulator, hose, switch and release with bracket. Mechanical nozzle For automatic disconnection at turnout. Rubber-coated nozzle with adjustable clips. Pneumatic nozzle Item No. APM 812A APM 813A APM 815A APM...

Profile rail Made from anodised aluminium with integrated guide rail. End stops with dampers made from yellow chromate steel. Made from yellow chromate steel with 5 ball-bearing wheels. Balancing block Balancing block in reinforced polyamide, inversely progressive with 4.5 m wire for trolley. Ceiling hose Heat-resistant, Hypalon coated polyester fabric. External coil in galvanised steel. Ø 160 mm connection in powder coated steel. Coil, polyamide. Vertical hose Heat-resistant, rubberised fabric in EPDM/polyester. Hose breakage protection Shock-resistant, manufactured in EPDM rubber....

9 m rail requires three fixings Nozzle and automatic control device suitable for AFSH Pneumatic nozzle For automatic disconnection at turnout. Pressurised manually at approach, with a rubber sleeve to seal around the exhaust pipe. Also has compressed air unit for automatic control devices, AFSH 809A. For automatic disconnection at turnout. Unit for automatic control devices is included, and supplied complete with regulator, hose, hose coil, switch and release with bracket. Mechanical nozzle For automatic disconnection at turnout. Rubber-coated nozzle with adjustable clips. Pneumatic nozzle...

Profile rail and rail fixing Made from anodised aluminium, with chain bracket and accompanying fitting brackets. Chain bracket for profile rail in yellow chromate steel. 1.5 m chain. Made from yellow chromate steel with 5 ball-bearing wheels. Balancing block Balancing block in steel plate with bracket for rail. Ceiling hose Heat-resistant, Hypalon coated polyester fabric. Coil in galvanised steel. Special, stable brackets are available for fitting the rail, see last page. Static pressure drop (Pa) Pressure drop with 6 m extended ceiling hose At turnout, the trolley automatically follows the...

9 m rail requires three fixings Control units Control of fans and automatic dampers SRC-MR Remote control To start and stop fans from the operator's console in the vehicle. Supplemented with control unit S400/600 or S200, see leaflet Control Units. Remote control Item No. AFS RS Description Remote control for gate Gate switch For automatic start/stop of fan/damper when opening a gate. Supplemented with control unit S400/600 or S200, see leaflet Control Units. Gate switch Item No. AFS PB

Bracket suitable for AFSA and AFSH Powder coated steel. Max length 1.0 m. The bracket sections are joined using Layher connectors. Weight: 1 m – 12.3 kg Wall bracket, adjustable Wall bracket Item No. Description AFS 210 Adjustable wall bracket Ceiling bracket, adjustable Ceiling bracket Item No. AFS 200 2000 Powder coated steel. Adjustable length, 140–2000 mm. The bracket sections are joined using Layher connectors. Weight: 1 m – 7.6 kg, 2 m – 10 kg Adjustable ceiling bracket Adjustable ceiling bracket Strut, ceiling or wall fixing Powder coated steel. Length 2 or 4 m. Turnable Layher...