Prdouct sheet CV_EN
8Pages

A flexible modular filter for particles and gas Fumex modular filter, CV with its sturdy profile, gives the possibility to satisfy the need of several functions in one product. The filter is, in its basic version, dimensioned to handle fumes from one work station, but several filters can be parallel connected to serve several work stations in the same system. Maximum flexibility from a simple disposable filter to a solution with cleaning via compressed air, but also the possibility to combine particleand gas filtration in the same unit or a gas filtration only. The filter unit is wall mounted and the sturdy profile makes the installation easy, but also simplifies necessary service and maintenance. The Fumex range also includes fans, accessories, automatic control and local extraction for filters Pure advantage

Cleanable filter unit Cleanable filtration unit with a 14m² filter surface in polyester. The filter cartridge is cleaned via compressed air. Filter with manual compressed air cleaning, with an external pre-filter, CVM, including a metal mesh. For applications with large amounts of dry particles, e.g. dust- and welding smoke in mechanical industries. Delivered with a filter cartridge, profile, two connections and requisite details for compressed air cleaning. It also includes an analogue pressure gauge that shows the pressure drop over the filter cartridge. The lower duct connection is 180°...

Cleanable filter type CVP With manual compressed air cleaning the filter has a long lifetime, even when there is a high load over the filter cartridge. 1. Pressure gauge that shows the pressure drop over the filter cartridge. The initial pressure over the filter cartridge is 100-200 Pa, depending on the airflow. When the pressure drop has increased to 800-1000 Pa the filter cartridge should be cleaned via the pulse valve. The most efficient cleaning is done with the fan shut off and with 3 to 5 pulses. The filter cartridge can also be cleaned with the fan on. Indication for filter change....

Disposable filter in steel casing Filter unit with several options for filter cartridges (particle and gas). The cartridge is placed inside a powder coated steel casing. The filter cartridge and steel casing is placed between two gables on an anodised aluminium profile. Delivered completely with filter cartridge, profile and two connections. For an easy filter cartridge change, the top gable is released and is lifted on the profile. Particle filter Filter for dry particles, e.g. dust- and welding smoke in mechanical industries. As a protection against big particles a pre-filter with a metal...

Gas filter The cartridge is placed inside a powder coated steel casing. Contains a standard active carbon that is suitable for absorption of odours, gases, smoke and VOC:s: e.g. toluene and methyl ethyl ketone. To obtain the best result it’s important to let the contact time between the carbon and the substance to be as long as possible. Therefore we recommend that the airflow over the filter module should not be higher than 500 m³/h. For a greater airflow two or more filter modules can be placed side by side. If the polluted air also contains particles, it’s advisable to place a particle...

Disposable filter The filter cartridge is placed between two gables on an anodised aluminium profile. The filter cartridge has a surface area of 22 m² in BIA class M. As a protection against big particles a pre-filter with a metal mesh is included inside the unit. The filter cartridge is placed between two gables on an anodised aluminium profile. Delivered with a filter cartridge, profile and two connections. For an easy filter cartridge change, the top gable is released and is lifted on the profile. Initial static pressure drop (Pa) Filter casing: Powder coated steel/paperboard Profile:...

The high efficiency meets the requirements of ErP for 2015. For welding applications, fan FBE 150 will provide an airflow of approximately 1200 m3/ h and have a power output of 1,5 kW, single phase or threephase. FBE 150 Energy-optimal operating point [61] Sound pressure level dB(A) 10 metres from fan at hemispherical sound propagation in free field with ducted inlet and free-blowing outlet side. Reducer to FBE. To be mounted on the inlet of the FBE 150 for a connection to the CV filter. 100 Analogue pressure gauge that shows the pressure drop over the filter cartridge. Delivered in a set...

Installation example Verkstadsvägen 2, 931 61 SKELLEFTEÅ, Sweden │ Tel: +46(0)910-361 80 │ Fax: +46(0)910-130 22 │ www.fumex.com │ info@f