cold drawn machined steel FR 5328 two-way travel, interchangeable with SPECIFICATIONS: ► non-handed and non-disconnect ► flat mounting possible, weight rating reduced ► ► cabinet: M5 flat head screws ► drawer: M5 x 0.8 screws SLIDE TYPE: Packing Unit: 10 pieces per box to 930mm length Click on any part number to navigate to the hole pattern page for that length.

general tolerances HARDWARE: CABINET- MS FLAT HEAD SCREWS DRAWER-M5x.8 SCREWS missing dimensions see 3D = theor. intersection This drawing remains our property and may not be multiplied neither be disclosed to third parties (§513 and S from the copyright Act (IJrhG))

missing dimensions see 3D = theor. intersection HARDWARE: CABINET- M5 FLAT HEAD SCREWS DRAWER- M5 x .8 SCREWS This drawing remains our property and may not be multiplied neither be disclosed to third parties (§§1,3 and 5 from the copyright Act (UrhG)}

general tolerances HARDWARE: CABINET- M5 FLAT HEAD SCREWS DRAWER-M5x.8 SCREWS missing dimensions see 3D = theor. intersection This d rawing remains our property and may not be m u Itlplled neither be disclosed to thl rd parties (5§14 and 5 from the copyrlg ht Act (UrhG))

general tolerances missing dimensions see 3D = theor. intersection HARDWARE: CABINET- M5 FLAT HEAD SCREWS DRAWER-M5x.8 SCREWS This drawing remains our property and may not be multiplied neither be disclosed to third parties (§§13 and 5 from the copyright Act (UrhG))

530 274±3 EXTENSION HARDWARE: CABINET- M5 FLAT HEAD SCREWS DRAWER-M5x.8 SCREWS general tolerances

HARDWARE: CABINET- M5 FLAT HEAD SCREWS DRAWER- M5 x .8 SCREWS general tolerances

HARDWARE: CABINET- M5 FLAT HEAD SCREWS DRAWER-M5x.8 SCREWS general tolerances

HARDWARE: CABINET- M5 FLAT HEAD SCREWS DRAWER- M5 x .8 SCREWS general tolerances