Main Specifications of Mitsubishi Generator Sets

Engine and Fuel Consumption

The generator sets feature engines with rated oil consumption and fuel consumption measured at 100% load. Specific values include oil consumption of approximately 6.2 L/h and fuel consumption around 2.3 to 2.82 L/h, depending on the model.

Engine Parameters

• Compression ratios vary between 13.5:1 and 14.0:1.
• Stable speed regulation rate is maintained within ±1 dBA.
• Noise levels at full load are specified at 100% load measured at 1 meter, with values around 3 dBA.
• Coolant capacity and lubricating oil capacity are provided, with coolant capacity around 3 m³/min (likely a flow rate) and lubricating oil capacity unspecified but indicated.

Alternator Specifications

• Alternator model referenced is IP22 AVR440 with 2/3 pitch.
• Prime output power ratings are indicated but specific kW/kVA values are not clearly stated.
• Power efficiency and waveform distortion parameters such as THF/TIF are mentioned but without explicit values.
• Open type alternator weight and dimensions (length x width x height in mm) are noted but exact figures are missing.

Additional Notes

The document appears to be a technical specification sheet for Mitsubishi generator sets powered by Yanan Power Generation, with certification or testing by Intertek. However, many data points are incomplete or fragmented, limiting detailed analysis.

Critical Information: Key parameters such as fuel and oil consumption rates, compression ratios, noise levels, and alternator model details are provided, which are essential for evaluating generator performance and suitability.

Limitations: The document lacks complete numerical data for some specifications, such as exact power output, efficiency percentages, and physical dimensions, which are necessary for comprehensive assessment.