ZPAF Biogas analyser
4Pages

{{requestButtons}}

Catalog excerpts

ZPAF Biogas analyser - 1

Simultaneously and continuously monitors H2S, CH4, CO2, and O2 Biomass gas analyzer Perfect system for your application Simultaneous and continuous measurement of 4 components: H2S, CH4, CO2, O2 Compact and lightweight 133 × 483 × 382 mm (H×W×D), approx. 9 kg Easy-to-see LCD A wide variety of optional functions Automatic calibration, concentration alarm for upper and lower limit, remote input for switching range, range identification signal output, etc.

Open the catalog to page 1
ZPAF Biogas analyser - 2

Biomass gasification process Biogas generated through fermentation of biomass can be used as a fuel for boilers, gas engines, and other applications. • Livestock excrement • Sewage sludge • Black liquor (papermanufacturing) • Paper • Food waste • Remaining materials in sawmills • Waste materials in construction • Inedible agricultural products • Forest residues etc. Energy use Storage tank  Biomass resources  Livestock excrement  Sewage sludge  Black liquor (paper - manufacturing)  Paper  Food waste  Remaining materials in sawmills, etc.  Waste materials in construction  Inedible...

Open the catalog to page 2
ZPAF Biogas analyser - 3

CH4, CO2 (Single beam NDIR sensor) O2 (Galvanic cell sensor) H2S (constant-potential electrolytic sensor) Zero drift by external contact input Remote output hold Components/ range Span drift Number of measurable Max. 4 (simultaneous and continuous measurement) components Analog output Contact output (optional) 1c contact (max. 15 points) Device error, calibration error, range identification, autocalibration status, solenoid valve drive for auto-calibration, limit alarm Contact input (optional) Voltage input (12 to 24 V DC) up to 9 points Remote switchover of ranges, auto-calibration remote...

Open the catalog to page 3
ZPAF Biogas analyser - 4

Digit 4 Specification 5 Installation 6 Measured components (CH4, CO2) Specifications Biomass gas 19-inch rack mount none CO2 (1st component) CH4 (1st component) CO2 (1st component)+CH4 (2nd component) Measured components H2S (O2, H2S) O2 + H2S Revision code Measurement range none (1st component 1st range) 0 to 20 vol% Measurement range none (1st component 2nd range) 0 to 100 vol% Measurement range none (2nd component 1st range) 0 to 20 vol% Measurement range none (2nd component 2nd range) 0 to 100 vol% Measurement range 0 to 10/25 vol% O2 0 to 500 ppm/2000 ppm H2S (O2, H2S) 0 to 500...

Open the catalog to page 4

All FUJI ELECTRIC France catalogs and technical brochures

  1. Gas analysers

    21 Pages