Ultrasonic Flowmeter S-Flow Easy Installation, Space Savings Flow rate is “visualized” using our long-cultivated ultrasonic technologies. Contributes to energy savings and production process solutions. Easy Clamp-on type by simply tightening 4 screws. No need for pipe modification. Integrated detector and flow transmitter for space savings. Built-in temperature sensor enables simultaneous measurement of flow rate and temperature (Optional). Compliant with

Easy installation, space savings. Easily deployable ultrasonic flowmeter S-Flow Carbon neutrality on a global scale has been attracting attention in recent years. Companies are promoting their activities to achieve high efficiency and energy savings. Against this backdrop, more demand is growing to control the flow rate of fluid at the end points of the production lines in the factories. Fuji Electric has developed the easy-deployable Integral Flowmeter, named “S-FLOW” to support such demand. It has realized easy installation, space savings and affordable cost. Overlooked small, densely-spaced...

The LED display is composed of inlaid layers. Requires connection to a dedicated cable during use. Equipment configuration Capable of measuring pipes from 8A to 32A. Type Integrates the detector and flow transmitter to simplify equipment configurations. Dedicated signal cable Measurable pipe materials and fluids Capable of a wide range of pipe materials and fluid types

Easy installation Reduces labor hours and installation costs type requires no pipe modification. It can be installed without stopping equipment. ■ Clamp-on need for the sensor-distance adjustment. Anyone can easily install it by simply tightening the screws. ■ No Clamp-on type without pipe modification. Easy installation using a single screwdriver. Easy to set up only with three buttons. Simply turn on, configure four settings, and start measuring immediately. ■ Configurable Conventional settings S-Flow settings Sensor type Mounting method (V and Z methods) Pipe materials Pipe materials Pipe...

Space savings Integral, Compact design transmitter and detector functions are integrated to achieve compact dimensions. ■ Flow Compared to conventional flow transmitter (type: FLR), the size is reduced by approximately 76%. (Unit: mm) Can be installed on densely-spaced piping and inside of equipment ■ Its compact design allows installation in areas where space is limited, such as in densely-spaced piping and inside equipment. Conventional Cannot be mounted on densely-spaced piping due to large size Can be mounted on small, densely-spaced piping Compact and easy to mount inside equipment Built-in...

Application example Flow control of semiconductor manufacturing equipment In addition to piping for pure water manufacturing processes, cleaning processes, and equipment cooling, it can also be mounted inside equipment where there is densely-spaced small-diameter piping. Contributes to flow control in semiconductor manufacturing lines. Inside the equipment Outside the equipment Flow measurement of semiconductor manufacturing equipment Flow monitoring of water for building air conditioning flow usage It can be installed to cold and hot water piping throughout the entire building. By measuring...

Dedicated signal cable _L_37

FUJI ELECTRIC FRANCE S.A.S. 46, rue Georges Besse - Zl du Brézet - 63 039 Clermont-Ferrand Cedex 2 - France Téléphone: +33 (0)4 73 98 26 98 Email : [email protected] Site internet : www.fujielectric.fr Fuji Electric cannot be held responsible for any errors in our catalogues, brochures or other printed media. Fuji Electric reserves the right to modify its products without n o t i c e . T h i s a l s o a p p l i e s t o t h e p r o d u c t s o r d e r e d , i f t h e m o d i f i c a t i o n s d o n o t a l t e r t h e s p e c i f i c a t i o n s s u b s t a n t i a l l y. T h e r e g i...