FuehlerSysteme eNET International The Brand for Sensor Technology Multifunctional Air Quality Sensor for C02, Mixed Gas VOC, Humidity and Temperature Humidity and Temperature Transducer with Sensor Protection in the High Humidity Range > 95% r.H. Carbon Monoxid Sensor for CO + Temperature with Measuring Range Changeover Motion/Brightness and Temperature Sensor Mini Motion Probe with Infrared Sensor

Multifunctional Air Quality Sensor for CO2, Mixed Gas VOC, Humidity and Temperature with Measuring Range Changeover The multifunctional air quality sensor CO2-M/A measures the CO2 concentration in the ambient air in the range of 0-10000 ppm (NDIR), mixed gas VOC in the range of 0...100% based on the calibration gas, the temperature and optionally the relative humidity, absolute humidity, mixing ratio or the dew point temperature of the ambient air. The transducer converts the respective measurement results for further processing into a linear output signal 0-10 V or 4-20 mA. Furthermore, the...

LCD display, to display the measured values on location 3 CO2 measurement ranges selectable via DIP switch Auto-Calibration ON/OFF Selection atmospheric / barometric Air Pressure Measurement type rel. humidity %, abs. humidity g/m3, air fuel ratio g/kg or dew point °C selectable via DIP switch Measurement value correction via offset-controller Automatic self calibration on a regular interval to ensure a highly accurate CO2 measurement Manual calibration of the output signal to 400 ppm (CO2 zero point) respectively 1 V (VOC zero point) by pushing the button Change-Over Contact Linear output signal...

Humidity and Temperature Transducer with Sensor Protection in the high humidity range > 95% The humidity and temperature sensor with transducer measures the temperature and selectively the relative humidity, absolute humidity, air fuel ratio or dew point of the ambient air and transforms it to a linear output signal 0-10 V or 4-20 mA. The secondary measuring value is selectable from the 4 measurement categories % r.H., g/m³, g/kg, DP by a DIP switch. The humidity and temperature sensor is protected against contamination by a screwable sinter filter. In addition, the humidity measuring instrument...

Heating Function Procedure: 1. Relative humidity exceeds the factory-preset threshold value (95...99% r.H.) 2. Heating function is activated for sensor protection 3. During the heating phase, the output signal is kept stable through compensation 4. The temporally limited heating function will be deactivated Ü 100% condensation protection at high humidity range Linear output signal 4-20 mA, 0-10 V Measurement type rel. humidity %, abs. humidity g/m3, air fuel ratio g/kg, dew point °C selectable via DIP switch 4 temperature measurement ranges selectable LCD display, to display the measured values...

Carbon Monoxide Sensor for CO + Temperature with Measuring Range Changeover The air quality sensor COT-K/A for air ducts measures the CO concentration of the ambient air in the range of 0-1000 ppm by an electrochemical sensor and the air temperature from 0...+50°C. The transducer converts the measurement values for further processing in a linear output signal 0-10 V or 4-20 mA. The transducer has 3 different scales (0-200 ppm, 0-500 ppm, 0-1000 ppm) which can be adjusted by innovative DIP switch technology. The zero-point adjustment in response to the current environmental conditions can be made...

Outdoor Sensor Room Sensor In-Wall Sensor Effect of Carbon Monoxide on the Human Body 0,003% MAC-Value = Maximum Allowable Concentration at 8 hours of working time Slight headache within 2 to 3 hours Headache in the forehead area wihtin 1 to 2 hours, spreads around the entire head within 2,5 to 3,5 hours Headache, dizziness and limb twitching within 45 minutes Unconsciousness within 2 hours Headache, dizziness and nausea within 20 minutes Death within 2 hours Atmospheric CO-concentration Headache, dizziness and nausea within 5 to 10 minutes Death within 30 minutes Headache, dizziness and nausea...

FuehlerSysteme eNET International The Brand for Sensor Technology ture Sensor for Ceiling Mounting The motion/brightness and temperature sensor BHT-D/A measures mo- vements in the area of 360° with a range of about 10 m by an infrared sensor, brightness from 0-1 kLux by a photo diode and the temperature from 0...+50°C. The holding time of the motion detector can be defined by a 270° potentiometer from 5 seconds to 15 minutes. Optional output signal for am bient tern perature Infrared motion . photodiode, NTClOk FuehlerSysteme eNET International GmbH | Roethensteig 11 190408 Nuernberg | Germany...

The unobtrusive housing with snap fastening and torque/pole-protected plug is suitable for quick mounting in suspended ceilings. The motion sensor is ideal for control processes, such as temperature and lighting control systems in offices. Snap fastening and removable plugs suitable for quick mounting in suspended ceilings Threshold for brightness-dependent motion detection adjustable by 270° potentiometer Holding time adjustable from 5 sec. up to 15 min. by 270° potentiometer

Mini Motion Probe with Infrared Sensor for Ceiling Mounting The mini motion sensor BFD2/A measures movements in the area of 360° with a range of about 10 m by an infrared sensor. In case of movements a normally-open contact is switching, which holding time can be set from 5 sec. up to 15 min. by a 270° potentiometer. The unobtrusive housing with snap fastening and torque/pole-protected plug is suitable for quick mounting in suspended ceilings. The motion sensor is ideal for control processes, such as temperature and lighting control systems in offices. Snap fastening and removable plugs suitable...

on stands! of our exhibiti Visit us at one 37322-0 r: ( +49 911 voucher unde for your entr y Exhibition Dates 2016 This year we will once again be attending more than one of the leading trade fairs in the field of measurement technology and control engineering. Come and visit us to find out about our new products and to gain an on-the-spot insight into the functionality, quality and efficiency they are able to deliver. We will be delighted to provide you with any guidance you may need and are looking forward to meeting you in person! Frankfurt a. M., 13.03.-18.03.2016 Hall 9, Stand C56 World‘s...