RENOLIN Product Program Hydraulic Fluids

FUCHS LUBRICANTS GERMANY We do not just develop lubricants. We develop intelligent solutions for highly complex challenges. To this end, we have pooled our expertise and experience from a wide range of application areas: FUCHS SCHMIERSTOFFE and FUCHS LUBRITECH became FUCHS LUBRICANTS GERMANY. Our goal: to keep our customers‘ world in motion. Efficient, sustainable, reliable. Today and tomorrow. What can we move for you?

Hydraulic Fluids FUCHS LUBRICANTS GERMANY Facts and figures Company: FUCHS LUBRICANTS GERMANY GmbH, a company of the FUCHS Group Locations: Based in Mannheim, with sites in Bremen, Dohna, Hamburg, Kaiserslautern, Kiel and Wedel; approx. 1,400 employees Product range: A full range of more than 3,000 products for all application areas Certifications i. a.: ISO 9001, IATF 16949, ISO 14001, ISO 45001, ISO 50001, ISO 21469, HALAL, KOSHER (detailed certifications at www.fuchs.com/de/en) CO2 neutral production* Since 1931, we have been pursuing the same goal: to keep the world moving. With innovative...

RENOLIN D15VG 46 detergency / dispersancy properties RENOLIN B 46 HVI Plus demulsifying, separate water quickly, HVI Ol RENOLIN Xtreme Temp 46 „high energy efficiency” Bosch Rexroth RDE90245 I PLANTOSYN 3268 (saturated ester-HEES) RENOLIN ZAF46 D HT detergency / dispersancy properties „low friction”, anti stick-slip RENOLIN UNISYN OL 46 (polyalphaole-fines - PAO) RENOLIN MR 15 VG 46 high detergency / dispersancy; high corrosion protection NEW: Group II base oils Xtreme Temp Plus „high energy efficiency - low friction” and slight detergent / dispersant properties RENOLIN ZAF 46 DT high detergency...

Hydraulic Fluids We combine quality with technical properties and sustainability. Technical requirements on hydraulic oils have toughly raised: pressure level is increasing, and simultaneously hydraulic oil tank volume is decreasing due to reduced installation space. As effect, oil circulation ratio also increases and the oil dwell time in the tank is shorter. Thereby, oxidation stability and thermal stability properties are getting more important. Machine constructors, end users and customers ask for better robustness, longer lifetime, reduced service cost, better filterability and universally...

Product name Viscosity point Main application area RENOLIN DTA 2 RENOLIN DTA 5 RENOLIN DTA 7 RENOLIN DTA 10 For thermally-stressed bearings and hydraulic systems with peak temperatures of approx. 120°C. General lubrication without specific wear protection requirements (without AW/EP). (Refer to PI* 4-1292 for further details) RENOLIN B - high-performance demulsifying AW/EP hydraulic and circulating oils, Denison HF0 approvedHLP-Oils (demulsifying) Product name Description application area VI Pour- Viscosity point RENOLIN B 3 VG 10 RENOLIN B 5 VG 22 RENOLIN B 10 VG 32 RENOLIN B 15 VG 46 RENOLIN...

RENOLIN B Plus - high-performance demulsifying AW/EP hydraulic and circulating oils, Bosch Rexroth RDE 90245 and Denison HF0 approved HLP-Oils (demulsifying) Product name Description Density FLP. Kin.Visc. Kin.Visc. VI Pour- Main at 15 °C Cleveland at 40 °C at 100 °C Viscosity point application area Range RENOLIN B PLUS Hydraulic oils, based on high-quality, hydrated base oils group II. Contains additives for excellent aging and oxidation stability, the zinc-containing AW / EP additive system protects against wear at high pressure and load. Extended oil drain intervals are possible. are suitable...

RENOLIN B HVI Plus - high-performance demulsifying AW/EP hydraulic oils with a high viscosity index, Denison HF0 approved HVLP-Oils (demulsifying) Product name Description Density FLP. Kin.Visc. Kin.Visc. VI Pour- Main at 15 °C Cleveland at 40 °C at 100 °C Viscosity point application area Range RENOLIN B HVI Plus Hydraulic and lubricating oils based on hiqhquality hydrated base oils (Group II). High viscosity index and excellent shear stability, in combination with extraordinaire oxidation stability, effects in long lifetime. High wear protection by using zinc-containing AW/ EP additives, demulsifying....

RENOLIN I Hydraulic Fluids RENOLIN XtremeTemp Plus - high-performance multigrade hydraulic oils based on new generation of base oils -shear stable, long lifetime HVLP-Oils (demulsifying) Product name Description Density FLP. Kin.Visc. Kin.Visc. VI Pour- Main at 15 °C Cleveland at 40 °C at 100 °C Viscosity point application area RENOLIN Range RENOLIN XtremeTemp XTREME TEMP 32 Plus PLUS As RENOLIN XtremeTemp, but - with additives which help to RENOLIN avoid stick-slip phenomena. XTREME TEMP 46 For high-pressure applications; PLUS reduce friction especially in mixed friction conditions DIN 51524-3:...

Product name Description Density FLP. Kin.Visc. Kin.Visc. VI Pour- Main at 15 °C Cleveland at 40 °C at 100 °C Viscosity point application area EP = Extreme pressure additives, to avoid wear and scuffing at high pressures and loads AW = Anti-wear additives, to avoid wear in mixed friction areas

Product name Description Kin.Visc. Kin.Visc. Viscosity point application area Range RENOLIN MR MC Universal lubricating and hydraulic oils based on MC base oils with high viscosity index (shear-stable). Excellent oxidation stability and outstanding cleaning properties and sludge carrying capacity. HVLPD according to DIN 51524-3 and ISO 6743/4: HV (with DD-properties) for RENOLIN MR in addition to those which require oils with high viscosity index. Allow oil change intervals to be extended, grades to be rationalized. Multigrade characteristics. Very wide operating temperature window. Energy saving...

RENOLIN HS 32 U - fully synthetic non-staining hydraulic fluid for the aluminium industry HLPD-Fluid - hydraulic fluid and lubricating oil especially for the aluminium industry Product name Description Density FLP. Kin.Visc. Kin.Visc. VI Pour- Main at 15 °C Cleveland at 40 °C at 100 °C Viscosity point application area RENOLIN HS 32 U RENOLIN HS 32 U is a special fully synthetic hydraulic oil for the aluminium industry. It is classified as non-staining hydraulic fluid. fully synthetic, nonstaining hydraulic fluid for the aluminium industry, recommended in rolling mills for highly stressed hydraulic...