MIXOMAT A
12Pages

Laboratory blenders for 3 to 25 litres drums

Laboratory blenders for 3 to 25 litres drums

Laboratory blenders for 3 to 25 litres drums Double-sided execution One-sided execution Executions 9 Stove enamelled stainless steel St.1.4301 housing, ground finish, grain size 240 9 Shaft with ball-bearing, sealed bearing housing 9 With chain transmission 9 Comfortseries control unit: Siemens Logo 8 PLC with 4 ” colour touch-screen, main switch, emergency switch, timer, recipes 9 Ecoline control unit: main switch, start, stop 9 Mains connection: 3 x 400 V (ecoline) 1 x 230 V (comfortseries) 9 Available as one- or double-sided blender (shaft ends on both sides possible) 9 ATEX version...

Laboratory blenders for 3 to 25 litres drums Mobile executions Levelling foot Caster rollers A base frame can be supplied as an option. This rack may be equipped either with caster rollers (swivel with brake) or with levelling feet. The underframe is in stainless steel. Surface: ground finish. Available with caster rollers or levelling feet. Art. number Levelling feet Art. number Caster rollers

Laboratory blenders for 3 to 25 litres drums Safety Devices Basically MIXOMAT A/AK Laboratory blenders are equipped with a safety hood, which protects persons from accidents which mainly consists of a hood of acrylic glass or of perforated stainless steel and a proximity switch, which allows to start mixing process only while the hood is completely closed. On double-sided versions, both hoods, which can be individually opened, must be closed to start the process. Plexiglas protection hood Perforated steel protection hood Perforated plates Perforated plates Perforated plates Perforated plates

Laboratory blenders for 3 to 25 litres drums Drum Holders MIXOMAT A/AK Lab blenders come usually with a type BV drum holders. The drum is put on the bottom of the holder. Now, the bracket is folded down and clamped by the means of an eccentric fastener. A levelling foot is pressured on the lid of the drum. It is also used to „fine”-adjust the holder on the height of the drum. Drum holders of the type BV can be customized and adapted to customers drums. They are in stainless steel, glass bead blasted. BV type drum holder BV type drum holders available as a standard for the following drum...

Laboratory blenders for 3 to 25 litres drums Adapters for smaller drums on standard holders Basically it is possible to install on the same drum holder drums of the same or smaller diameter. Therefore we propose an adapter made in stainless steel 1.4301. Adapter for BV type holder:

Drums The following FUCHS drums are available as a standard: Stainless steel drum Executions: 9 Stainless steel St.1.4301, brushed (Ra <= 1.2µm) 9 Stainless steel St. 1.4404, brushed (Ra <= 1.2µm) 9 electro-polished on request 9 3 to 25 l stainless steel drums without reinforcement beads, without handle, with cover and silicon seal Delivery: 9 Drum 9 Cover 9 Tension ring 9 Baffle fixed under the cover (optional, see p. 10) Plastic drum Execution: 9 3-26 l 9 ND-PE, white 9 Food-safe 9 3 to 26 l plastic drum Delivery: 9 Drum 9 Red cover with screw cap 9 Baffle fixed under the cover (optional,...

Drum sizes for all MIXOMAT blenders

Baffles for various drums Two-armed baffles for 3 to 25 l drums Execution 9 Stainless steel St. 1.4301 or St. 1.4404 9 electro-polished on request

More information CONFIG+ - Popular blender configurations MIXOMAT A/AK This configuration is offered at even more advantageous prices. Please ask us. With a bit of luck, the machine is already in stock in this configuration and can therefore be delivered immediately. CONFIG+ A.1 and AK.1 - MIXOMAT A ecoline: M-A-0430 - MIXOMAT AK ecoline: M-AK-0430 - MIXOMAT A comfortseries: M-A-0420 - MIXOMAT AK comfortseries: M-AK-0420 9 Standard blender housing MIXOMAT A or AK made of stainless steel 1.4301 9 Controller type ecoline (Functions: start and stop switch) 9 Drum holder type BV made of...

Issue date: 2020-09 Design: almut-m.com https://fuchsag.com/downloads-192/type/brochure/machine-type/mixomat-a.html FUCHS Maschinen AG Englisberg 17 1763 Granges-Paccot (Switzerland) Phone: +41 26 510 10 00 info@fuchsag.com www.fuchsag.com