Tilting drum blenders for 100 to 400 litres drums

Tilting drum blenders for 100 to 400 litres drums Tilting drum blenders for 100 to 400 litres drums Drum holder: see p. 8 Housing: see p. 4

Tilting drum blenders for 100 to 400 litres drums MIXOMAT C type drum blenders are available in two electrically tilting versions: MIXOMAT C-SE: Economic version with tilting housing, suitable for most applications. This version isn't suitable for clean-room applications. S Double-sided version also available MIXOMAT C-HE (see p. 28ff): High-End version for clean rooms or for highest possible performance with tilting sealed shaft and closed housing. Only one-sided version possible. S Standard drums of 100 to 400 litres available (with C-HE type 150 to 400 litres) One-sided MIXOMAT C-SE execution...

Tilting drum blenders for 100 to 400 litres drums Size 1 and 2 MIXOMAT blenders can also be supplied as mobile execution. They are placed on an underframe fitted with levelling feet or caster rollers with brakes (2 fixed and 2 swivelling). The following standard executions are available:

Tilting drum blenders for 100 to 400 litres drums To prevent accidents FUCHS advises its customers to install safety devices such as metal or photoelectric barriers equipped with safety switches. MIXOMAT C-SE Safety Devices These safety switches are connected to the control unit by means of two terminals (only one being used with one-sided blenders). Protection guards may also be supplied by FUCHS. Safety guard for C-SE type MIXOMAT blender (stationary execution) Features of standard executions for stationary units: S For 1 and 2 sided blenders S Access to blending drums through two swing doors...

Tilting drum blenders for 100 to 400 litres drums Features of standard executions for mobile units: S Access to blending drums through tilting safety guard, operated by hand S Magnetic safety switch S Compact execution S Easy opening and closing thanks to gas spring support S PMMA planking, stainless steel frame The following standard executions are available:

Tilting drum blenders for 100 to 400 litres drums The following standard drum holders are available: The holder is very easy to use. Safe holding is guaranteed by one quick-action clamping fastener (for 300 and 400 l drums: two) with a special safety locking system preventing any undesired opening of the fastener. Holder in glass bead blasted stainless steel St.1.4301. The following HRK type holders are available for the drums listed below: SPK type Spanset belt holder The drum is held on the holder by means of two SpanSet belts. This very price worthy holder is used when only a few daily or...

Tilting drum blenders for 100 to 400 litres drums The following SPK type holders are available for the drums listed below:

Tilting drum blenders for 100 to 400 litres drums Tilting drum blenders for 100 to 400 litres drums Drum trolley: see p. 17 Mobile execution: see p. 5 and 7

Tilting drum blenders for 100 to 400 litres drums Housing / Electrically tilting C-HE type MIXOMAT blender Execution S Stainless steel St.1.4301 housing, ground finish S Shaft with ball-bearings, sealed bearing housing S Drive with worm geared motor S Electrical vertical movement with linear drive S ATEX version available for zone 2/22 or 1/21 S Mobile execution available (C-HE2) S Siemens S7-1200 control unit with integrated 7 " colour touch-screen S Controller languages: English, German, French, Spanish and Dutch, others on request Option: safety device C-HE: see page 14

Tilting drum blenders for 100 to 400 litres drums SPK type Spanset belt holder The drum is held on the holder by means of two SpanSet belts. This very price worthy holder is used when only a few daily or weekly blendings have to be carried out. The SpanSet belts allow a great amount of drum diameter (approx. 0/-50 mm) and height (+30/-10 mm) tolerances. Holder in glass bead blasted stainless steel St.1.4301. The following SPK type holders are available for the drums listed below:

Tilting drum blenders for 100 to 400 litres drums Various standard drum holders are available. S These holders are used in most cases, specially with drums of up to 120 litres capacity S The drums used must have the same height S Smaller drums may also be used thanks to simple adapters S The BV type holder is very easy to use S In stainless steel, glass bead blasted BV type drum clamp holder *) plastic drum

Drums The following FUCHS drums are available as a standard: Stainless steel drums Plastic drums 30 to 200 l stainless steel drum: with 2 reinforcement beads and 2 point welded handles, with cover and silicon seal. 300 to 400 l stainless steel drum: with 2 reinforcement beads and base ring, cover with Perbutan seal and 5 galvanized steel clamping fasteners. Execution: S Stainless steel St.1.4301, bright S Stainless steel St. 1.4404, S 30-220 l ND-PE, opaque, blue as rolled finish (St.1.4435, elec- bright as rolled finish S Food-safe trolytic polish on request) Delivery: Drum, cover (black), tension...

Baffles for various drums Four-armed baffles for 30 to 400 l drums Execution  Stainless steel St. 1.4301 or St. 1.4404, electrolytic polish on request

DRUM TROLLEYS ecoline s Galvanised steel roller housing S Rollers made of white PA S Rollers mounted on slide bearings s Stainless steel frame 1.4301, ground finish comfortseries S Stainless steel caster roller housing 1.4301 S Rollers made of dark grey polyurethane S Rollers mounted on ball bearings S Electrically conductive

More information Simple but efficient mechanical processes for bulk materials by FUCHS. For more information see below: Drum blenders Disc mills  Blending  Inking  Dissolving solid matters in liquids  Sizing  Control and safety sifting  Dedusting  Milling products such as sweet corn, cereals, stark, minerals, chemical and pharmaceutical products  Food industry  Chemical industry  Pharmaceutical industry  Food industry  Pharmaceutical industry  Chemical industry  Milling  Animal feed industry  Food industry https://www.fuchsag.com/ drum-blender.html https://www.fuchsag.com/ sifters.html...