FST distributor
20Pages

Compressed Air Treatment for applications up to 2.500 m3/h

Compressed air treatment ABOUT FST THERE IS ALWAYS A SOLUTION FST GmbH was founded in 2009. We specialise in the treatment of compressed air and technical gases. A market segment with a growing need for innovative, efficient, economical, resource-saving and environmentally friendly technical solutions. Our aim is to inspire our customers not only with our products, but also with our advice and support, our service and especially with our employees - even long after a purchase has been made. We offer a complete product portfolio for a wide range of applications. All compressed air purity...

Compressed air treatment INTERESTING FACTS Compressed air is energy in the form of compressed ambient air. Compressed air constantly seeks to expand back to ambient pressure and performs work during this expansion process. Alongside electrical energy, compressed air is one of the most important forms of energy in industrial production processes and is widely used due to its many advantages: removes unwanted impurities and produces the compressed air purity required for the respective application - from control air or technically oil-free compressed air to sterile ultra-pure air or medical...

Compressed air treatment WATER SEPARATOR, COALESCENCE- AND ACTIVATED CARBON FILTER Robust aluminium housing with 2-layer surface protection for a long service life. Overwind protection for easy maintenance. Robust steel housing with 2-layer surface protection for a long service life. Filter elements with plug-in connection easy element replacement and secure sealing between filter housing and element. ISO 12500 validated filter elements with pleating technology for high separation efficiency at low differential pressure. water separator coarse filter 99,9999% (1µ) ≤ 0,5 mg/m³ res.oil cont....

Compressed air treatment WATER SEPARATOR, COALESCENCE- AND ACTIVATED CARBON FILTER Compressed air filtration is an elementary component of compressed air treatment and is included several times in a purification chain. Compressed air filters gradually remove all types of solid and liquid contaminants from the compressed air - from large amounts of condensate and coarse contaminants such as rust and abrasion, oil droplets and dust to the finest oil mist and fine dust. Compressed air filters with activated carbon also remove foul-smelling oil vapours. Special compressed air filters even...

Compressed air treatment FRIDGE DRYER – DFLO Indication of dryer capacity and various operating statuses via display and status LED. From DFLO150 with potential-free contact. A generously dimensioned air circuit ensures low flow velocities and achieves very good condensate separation and low differential pressure. Air/air heat exchanger, evaporator and demister are combined in a compact aluminium module. All models are available as air or (from size 66) water-cooled systems. All models are equipped with a level-controlled condensate drain.

Compressed air treatment FRIDGE DRYER – DFLO The DFLO series of refrigerant dryers are designed for drying compressed air without aggressive components to pressure dew points of up to +3oC. With a range of 29 models, the DFLO refrigeration dryer series is extremely versatile. The incoming compressed air is precooled in an air/air heat exchanger. This pre-cooling takes place in counterflow to the outgoing, already cooled compressed air and therefore works without any additional energy requirement. It is then cooled to the desired pressure dew point via a refrigerant/air heat exchanger....

Compressed air treatment FRIDGE DRYER – DFLO-ES – THERMAL MASS DRYER Cooling takes place in the patented refrigerant/air/glycol heat exchanger. The cold accumulator achieves high energy savings in partial load operation. Air/air heat exchanger, evaporator and demister are combined in a compact aluminium module. Indication of dryer status and various operating conditions via display and status LED. From DFLO150 ES with potentialfree contact. All models available as air or water-cooled (from size 150) systems available All models are equipped with a level-controlled condensate drain

zum Datenblatt Compressed air treatment FRIDGE DRYER – DFLO-ES – THERMAL MASS The DFLO ES series refrigeration dryers are designed for drying compressed air without aggressive components to pressure dew points of up to +3oC. With a range of 21 models, the DFLO ES refrigeration dryer series is extremely versatile. Features: ● 21 models for volume flows from 54 m3/h to 6.000 m3/h The incoming compressed air is precooled in an air/air heat exchanger. This pre-cooling takes place in counterflow to the outgoing, already cooled compressed air and therefore works without any additional energy...

Compressed air treatment ADSORPTION DRYER – DPS High quality molecular sieve with mix-bed filling for stable pressure dewpoints up to -70oC. Innovative C1 control with clear text display – optionally with load dependant control. Pressure vessels made in Germany. Different certifications and materials on demand. Compact valve blocks (up to DPS100). Large cross flow sections and no leakages. An equal distribution of the compressed air flow through the stainless steel sieve tray (from DPS10) ensures low differential pressure and a long service life of the desiccant. ...AS WELL AS AN EXTENSIVE...

Compressed air treatment ADSORPTION DRYER – DPS Heatless regenerated adsorption dryers of the DPS series from FST are characterised by high reliability. The use of a high-quality desiccant mixed-bed layer consisting of water-resistant silicagel WS and molecular sieve MS ensures high efficiency and a long service life of the desiccant. Large cross flow sections contribute to a low differential pressure. The DPS 1-8 and DPS 10-100 series are equipped with valve blocks. The individually controlled valves ensure trouble-free operation and are easy to maintain. The DPS 120-630 series are...