
Catalog excerpts

Ultra High Q, Low ESR Capacitors High Q, Low ESR Capacitors General Purpose Capacitors 0201 to 2220 case sizes 6.3 VDC to 3000 VDC RoHS Compliant HALOGEN Free DESIGNING THE CUTTING EDGE
Open the catalog to page 1
* Frontier Electronics, Corp. reserves the right to make product design changes without notice. Frontier Electronics’ standard terms and conditions are applicable to all listed products unless otherwise specified. Frontier Electronics Corp.® http://www.frontierusa.com 667 E. Cochran St. Simi valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989
Open the catalog to page 2
Frontier Electronics Corp.® 667 E. Cochran St. Simi valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989
Open the catalog to page 3
R = Reflow soldering process; W = Wave soldering process 667 E. Cochran St. Simi valley, CA 93065 Phone:
Open the catalog to page 4
667 E. Cochran St. Simi valley, CA 930
Open the catalog to page 5
Our standard kits are listed above, however, different capacitance values/case sizes/and voltages are available. Frontier Electronics Corp.® 667 E. Cochran St. Simi valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989
Open the catalog to page 6
GENERAL PURPOSE & HIGH VOLTAGE (G SERIES) Part Number Description Electrical Characteristics Impedance vs. Frequency (typical) Capacitance Chiange - Typical Aging Rate DC Bias Characteristics Temperature Coefficient of CapacitanceFrontier Electronics Corp.® http://www.frontierusa.com 667 E. Cochran St. Simi valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989
Open the catalog to page 7
* Tolerance available only for 100V and lower 667 E. Cochran St. Simi valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989
Open the catalog to page 8
GENERAL PURPOSE & HIGH VOLTAGE (G SERIES) X7R DIELECTRIC The letter code in the cell indicates the dimensions and package quantity. The reference table is on page 4 of the catalog. Frontier Electronics Corp.® http://www.frontierusa.com 667 E. Cochran St. Simi valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989
Open the catalog to page 9
GENERAL PURPOSE & HIGH VOLTAGE (G SERIES) X7R DIELECTRIC The letter code in the cell indicates the dimensions and package quantity. The reference table is on page 4 of the catalog. Frontier Electronics Corp.® http://www.frontierusa.com 667 E. Cochran St. Simi valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989
Open the catalog to page 10
GENERAL PURPOSE & HIGH VOLTAGE (G SERIES) X5R DIELECTRIC *J Tolerance available in 0201 case size only The letter code in the cell indicates the dimensions and package quantity. The reference table is on page 4 of the catalog. Frontier Electronics Corp.® 667 E. Cochran St. Simi valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989
Open the catalog to page 11
SOFT (FLEXIBLE) TERMINATIONW Soft Termination is available on most of our G Series Capacitors, 0805 case and larger. With up to 5mm of PCB flex, Soft Termination protects the MLCC from stress fractures with zero failures. Measuring Method The test sample is soldered onto a PCB and the PCB is deflected, with deflection rate of 1mm/s until the capacitance change exceeds ±12.5%, which is considered a failing point. The table below summarizes the deflection results: • Please contact Frontier Electronics for additional information and product availability. Frontier Electronics Corp.®...
Open the catalog to page 12
ULTRA HIGH-Q, LOW ESR (M SERIES) NP0 DIELECTRIC, 1+ GHz Part Number Description Electrical Characteristics Frontier Electronics Corp.® http://www.frontierusa.com 667 E. Cochran St. Simi valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989
Open the catalog to page 13
ULTRA HIGH-Q, LOW ESR (M SERIES) NP0 DIELECTRIC, 1+ GHz Electrical Characteristics RF15, NP0, 50V Comparison Measured data (<8.5GHz) Simulation data 20 Self resonance frequency (GHz) Measured data (<8.5GHz) Simulation data Self resonance frequency (GHz) Frontier Electronics Corp.® http://www.frontierusa.com 667 E. Cochran St. Simi valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989
Open the catalog to page 14
Frequency (MFIz) Frequency (MFIz) Frontier Electronics Corp.® http://www.frontierusa.com 667 E. Cochran St. Simi valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989
Open the catalog to page 15
The letter code in the cell indicates the dimensions and package quantity. The reference table is on page 4 of the catalog.F rontier Electronics Corp.® Page 15 of 22 667 E. Cochran St. Simi valley, CA 93065http://www.frontierusa.com Phone: 1-805-522-9998, Fax: 1-805-522-9989
Open the catalog to page 16
Part Number Description General Electrical Data Electrical Characteristics Frontier Electronics Corp.® http://www.frontierusa.com 667 E. Cochran St. Simi valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989
Open the catalog to page 17
Frontier Electronics Corp.® http://www.frontierusa.com 667 E. Cochran St. Simi valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989
Open the catalog to page 18
HIGH-Q, LOW ESR (H SERIES) NP0 DIELECTRIC, UP TO 1GHz 667 E. Cochran St. Simi valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989
Open the catalog to page 19
Test Condition 'To apply voltage(<100V) 250%. Duration: 1 to 5 sec. Charge & discharge current less than 50mA. No remarkable defect Dimensions conform to individual specification sheet Shall not exceed the limits given in the detailed spec Adhesive Strength of Termination No remarkable damage or removal of the terminations. Frontier Electronics Corp.® http://www.frontierusa.com 667 E. Cochran St. Simi valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989
Open the catalog to page 20
Test Condition Vibration Resistance * Vibration frequency: 10~55 Hz/min. * Total amplitude: 1.5mm * Test time: 6 hours (Two hrs each in three mutually perpendicular directions) * Measurement to be made after keeping at room temp. for 24±2 hours * No remarkable damage. * Cap change and Q/D.F.: To meet initial spec. * Solder temperature: 235±5°C * Dipping time: 2±0.5 sec. 95% min. coverage of all metalized area. Bending Test *The middle part of substrate shall be pressurized by means of the pressurizing rod at a rate of approximately 1 mm per second until the deflection becomes 1 mm and then...
Open the catalog to page 21
Test Condition Humidity (Damp Heat) Load * Test temp.: 40±2°C * Humidity: 90~95%RH * Test time: 500+24/-0 hrs. * Voltage : Rated voltage.(Max.500V) * Before initial measurement (Class II only): To apply test voltage for 1 hr at 40°C and then set for 24±2 hrs at room temp.* Measurement to be made after keeping at room temp. for 24±2 hrs. Rated voltage Rated voltage *I.R.: >10V, 500MQ or 25 Q-F whichever is lower. Class II (X7R, X7E, X5R, Y5V) Rated voltage High Temperature Load (Endurance) (6)150% of rated voltage for below range: Rated voltage ‘Before initial measurement (Class II only): To...
Open the catalog to page 22All Frontier Electronics catalogs and technical brochures
-
LP3800K0603BT
2 Pages
-
LP5900E0805AT
2 Pages
-
LP5900M0805AT
2 Pages
-
LP2500E0805AT
2 Pages
-
LP2500K0603CT
2 Pages
-
LP2500K0603BT
2 Pages
-
LP2500K0603AT
2 Pages
-
LP2500M0402CT
2 Pages
-
LP2500M0402BT
2 Pages
-
LP2500M0402AT
2 Pages
-
LP2500E0805BT
2 Pages
-
LP1910M0603BT
2 Pages
-
LP1910M0402BT
2 Pages
-
LP1910M0402AT
2 Pages
-
LP0915E0805AT
2 Pages
-
LP0915M0603AT
2 Pages
-
LP0915M0402AT
2 Pages
-
MBR10L45FCT
2 Pages
-
GP02-25
2 Pages
-
BCT8-005
2 Pages
-
Magnetic Components
198 Pages