*mydirectindustry

LP2500M0402AT

1 / 2 PagesView full catalog

LP2500M0402AT

Product catalog summary

Product Features

Surface mount low pass filter with dimensions of 1.0 x 0.5 x 0.4 mm, compliant with RoHS standards.
Offers low insertion loss and high rejection rate.
Highly stable under varying temperature and humidity conditions.

RF Characteristics

Frequency range: 2400-2500 MHz.
Maximum insertion loss: 0.45 dB at 25°C and 0.55 dB from -40°C to +85°C.
VSWR: Maximum of 1.7.
Impedance: 50 Ω.
Minimum attenuation: 21 dB at 4800-5000 MHz and 7200-7500 MHz.
Operating temperature range: -40°C to +85°C.

Physical Dimensions

Length (L): 1.00 ± 0.10 mm.
Width (W): 0.50 ± 0.10 mm.
Thickness (T): 0.40 ± 0.10 mm.
Other dimensions (A, B, E): 0.35 ± 0.10 mm and 0.30 ± 0.10 mm respectively.
Additional dimensions (C, D): 0.15 ± 0.10 mm.

Terminal Configuration

P1: Input
P2: Ground (GND)
P3: Output
P4: Ground (GND)

PCB Design/Layout Consideration

Design trace width to achieve 50Ω impedance.

Catalog excerpts

LP2500M0402AT LOW PASS FILTER SPECIFICATION Rev. A PRODUCT FEATURES 1. Surface mount low pass filter with a small size of 1.0 X 0.5 X 0.4 mm, RoHS compliant. 2. Provide low insertion loss and high rejection rate. 3. Highly stable under temperature and humidity changes. Note: - Unit in mm - Design trace width to be 50Q impedance. LAND No pattern Solder resist F rontier Electronics Corp.® Page 1 of 2 667 E. Cochran St., Simi Valley, CA 93065

Open the catalog to page 1

LP2500M0402AT LOW PASS FILTER SPECIFICATION Frontier Electronics Corp.® http://www.frontierusa.com 667 E. Cochran St., Simi Valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989

Open the catalog to page 2

All Frontier Electronics, Corp. catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list