VR 5000 Case - 2 Pages

Add to MyDirectIndustry favorites
VR 5000 Case

Catalog excerpts

/ Battery Charging Systems / Welding Technology / Solar Electronics VR 5000 Case / The small, sturdy wirefeeder for the TransSteel series / The VR 5000 Case is a wirefeeder that feels most at home in maritime environments: weighing less than 10 kg (22.05 lb) and with minimal obstacle contours thanks to its ergonomically shaped plastic housing, it fits through any manhole down to diam. 350 mm (13.8 inches) and withstands the very toughest requirements. Being so compact, the VR 5000 Case makes work easier wherever space is tight. / Compact, shockproof, portable / Ideally protected controls, thanks to optimised design / 100 % insulated against high atmospheric humidity, dust and splashwater / Available in Synergic and Manual, water or gas-cooled models / For use in shipbuilding, offshore, railway-vehicle manufacturing and in many different types of site-erection work / The smallest wirefeeder with the sturdiest design and the stablest arc. / Weighing less than 10 kg (22.05 lb) and with minimal obstacle contours, the VR 5000 Case fits through any manhole commonly found in shipbuilding, down to 350 mm (13.8 inches).

 Open the catalog to page 1

/ An adapted Fronius interconnecting hosepack makes the unit quick to connect up, and handy to work with. A specially developed sturdy bayonet connector acts as a strainreliever for the interconnecting hosepack. An optional mechanical strain relief device can also be integrated if desired. With gas-cooled welding systems, it makes possible distances of up to 70 m (76.5 yards) between the power source and the welding workplace. / Tilt-up side covers on both sides provide optimum access to the wirespool, the motor plate and the interconnecting hosepack connectors. The covers also give the...

 Open the catalog to page 2

All FRONIUS catalogs and technical brochures

  1. LaserHybrid

    1 Pages

  2. WF 25i Case

    1 Pages

  3. LSC

    12 Pages


    8 Pages


    12 Pages