Catalog excerpts
/ Battery Charging Systems / Welding Technology / Solar Electronics VarioSynergic 3400/4000/5000 / MIG/MAG welding system / VarioSynergic is a microprocessor-controlled MIG/MAG welding system consisting of a power source, a wirefeeder, a welding torch and a cooling unit. Synergic Mode makes the system much easier to handle: just set the sheet thickness and the filler metal, and leave the power source to adjust everything else by itself. VarioSynergic is available in two different versions: a compact version with an integral wirefeeder, or with an external wirefeeder for portable deployment. WELDING PROPERTIES / The synergic function of VarioSynergic contains expert knowledge for every application. Make your pre-selections for sheet thickness and filler metal, and the machine will adjust everything else by itself: the amperage, the voltage and the deposition rate. / VarioSynergic works with wire diameters of between 0.8 mm and 1.6 mm, has an inductance tap for CO2 welding, and welds flux-cored and all solid wires. / This lets you achieve outstanding welding results, easily and with only a very few settings. / The ignition process is reliable and absolutely jerk-free: at the start of welding, the wire is fed more slowly and only gets up to speed once the arc has ignited. / The end-of-welding sequence is easy to define, with an adjustable wire burn-back. / Synergic Mode: Just set your sheet thickness and filler metal – and start welding! / Perfect wirefeed thanks to 4-roller drive. / The specially tuned inductance makes it possible: optimum welding with CO2 and mixed gas.
Open the catalog to page 1Mains voltage, reconnectable, + / - 10 % Mains frequency Mains fuse protection (slow-blow) Primary continuous current (100 % d.c.) Efficiency Welding current range Open-circuit voltage Working voltage IEC ‘degree of protection’ code Insulation class / 4-roller drive / Automatic cooling-unit cut-out / Feeder creep / Feeder inching / Gas-test function / Basket-type spool adapter / Microprocessor control / Polarity reversal (optional) / PullMig mode (optional) / Synergic Mode / Thermostat-controlled fan / Overtemperature protection / Intermediate wirefeeder (optional) / 2- and 4-step mode /...
Open the catalog to page 2All FRONIUS catalogs and technical brochures
-
Vizor 4000 Plus
1 Pages
-
Fazor 1000 Plus
1 Pages
-
Arctig
4 Pages
-
TransPocket 150/180
4 Pages
-
TPS/i Intelligent REvolution
4 Pages
-
LaserHybrid
1 Pages
-
TRANSPOCKET 180
2 Pages
-
AccuPocket 150/400
16 Pages
-
ACCTIVA Professional Flash
2 Pages
-
ACCTIVA Seller
2 Pages
-
ACCTIVA Standard
2 Pages
-
ACCTIVA Twin 15A
2 Pages
-
ACCTIVA Brochure
8 Pages
-
Plasma welding
4 Pages
-
WF 25i Case
1 Pages
-
WF 25i / VR 4000 / VR 5000
2 Pages
-
LSC
12 Pages
-
Cold metal transfer
16 Pages
-
Magic cleaner
1 Pages
-
TransPuls Synergic 2700
6 Pages
-
VR 5000 Case
2 Pages
-
TransSteel 3500 / 5000
12 Pages
-
ACCTIVA
8 Pages
-
Flyer Ri charging process
2 Pages
-
Virtual Welding
8 Pages
-
Automated welding systems
10 Pages
-
TransTig 1600 / 1700
6 Pages
-
VarioStar 1500 / 2500 / 3100
2 Pages
-
Solar Electronics
88 Pages
-
SELECTIVA
12 Pages
-
CLAMP CHUCK FMC
1 Pages
-
GRIPPER CHUCK FSG
2 Pages