TRANSPOCKET 180 / SMAW & TIG DC welding - 4 Pages

Add to MyDirectIndustry favorites

Catalog excerpts

/ Perfect Welding / Solar Energy / Perfect Charging TRANSPOCKET 180 / SMAW & TIG DC welding / The goal while developing the new generation of TransPocket devices was simple: to make the good better. Thanks to a fully digitised and intelligent resonance system, the control response has been improved, leading to better ignition, less spatter and a highly stable arc. Furthermore, the optimised housing has made the unit more robust than ever. MAXIMUM EFFICIENCY / The new TransPocket series stands for maximum energy efficiency. Users benefit from far lower energy consumption and can therefore reduce their energy costs in the long term. VOLTAGE AND CURRENT CURVE WITHOUT PFC / This is supported by PFC (Power Factor Correction), which firstly enables the use of extremely long power leads with lower losses and improved generator compatibility. This massively expands the action radius for the welder. / The new Time ShutDown function, short tSd, switches off the power supply after a user-specified time window, thereby saving energy. This leads to the most energyefficient use of the device. Mains voltage Current consumption Power consumed Power lost VOLTAGE AND CURRENT CURVE WITH PFC / PFC models the input current such that it has an almost ideal sinusoidal progression and the available power is used efficiently (little or no reactive power)

 Open the catalog to page 1

ROBUST AND PORTABLE / The new TransPocket series is sturdier than ever and is the perfect companion for building sites and tough working conditions. A robust, ergonomic housing with integrated edge and wear chassis protection and intelligent slat design protects the whole device from dirt and moisture. / The inner parts are mounted on the specially designed plastic carrier, which also contributes to the exemplary robustness of the TransPocket series. The optimised airflow reduces contamination and guarantees a very long service life. The IP 23 protection class speaks for itself. The FUS...

 Open the catalog to page 2

PERFECT WELD PROPERTIES / Fronius’s proven digital resonance concept has been refined to give even more precise and faster control of the welding current. Based on the presence of constant power reserves, there is an instant response to every minute change in the arc. This enables an ideal starting characteristic. A consistently perfect arc with minimum spatter leads to the best weld properties. / The new device series can be used with all electrodes. Rod electrodes with diameters up to ⁵⁄₃₂ inch and cellulose electrodes (CEL) give perfect welding results thanks to a special operating mode....

 Open the catalog to page 3

/ The TIG variant is equipped with: an integrated gas solenoid valve, TIG pulsing, TAC tacking function and TMC (TIG Multi Connector) connection. The TransPocket 180 TIG is also designed for welding currents up to 220 A. The TransPocket 180 is also available as a multivoltage variant. The power source guarantees a continuous voltage range from 96 - 265 volts and can therefore be operated worldwide on a single-phase power supply. One power source for all grids. The TransPocket 180 series is available with a remote control (RC) option. TP 180 / TP 180 TIG / TP 180 RC TP 180 MV Mains voltage...

 Open the catalog to page 4

All FRONIUS catalogs and technical brochures

  1. LaserHybrid

    1 Pages

  2. WF 25i Case

    1 Pages

  3. LSC

    12 Pages

  4. VR 5000 Case

    2 Pages


    8 Pages


    12 Pages