T600E FEY
1Pages

Steel-grid fixed resistors1,0 - 19,5 kW, up to 7,8 MWs, for integration, low ohmic values, high energy absorption capacity Steel-grid fixed resistor block in protection degree IP 00 for high energy absorption capacity, for integration into switch cabinets, devices or ventilation ducts. Connection directly at the resistor. O in preparation Electrical and mechanical data • for high energy absorption capacity • for high continuous currents • integration and combinations possible • for integration into switch cabinet • continuous dissipation up to 19,5 kW • energy absorption capacity with AT = 300 K, up to 7,8 MWs • optional with temperature switch (TS) with fast-on connections 6,3x0,8, type FEYQ 31... Each resistor device can be equipped with connections are made with screws M12 at the mounted connecting lugs. The integration in a switch cabinet, machine or in a duct is made by means of 2 threaded bolts M12. We achieve a wide range of resistance values and wattage rating by variation of number of steel-grids and resistance values. The given power rating values are valid for 100%CD (continuous dissipation). For short time operation you will find the values in the following table as a function of the duty cycle factor (DCF). Just multiply by the corresponding overload factor (OLF). This table represents only a selection of our program. All numbers of steel-grids between 2 pcs.. (1,0 kW) and 39 pcs. (19,5 kW) corresponding to our types are available. For the type code and selection of units you will be assisted from us. These overload factors are valid for a total cycle time of maximum 120 s Warning: Not more than 3 resistor blocks should be mounted on top of each other! For customer wiring you should use a heat resistant wire. Application Example of dimensioning and selection of a special unit: Three phase filter resistor, for 3 x 1,0 kW and 3 x 690 V AC, resistor value 3 x 35 mQ; selected: 3 x 2 S312G - 0,018 with each 0,5 kW (X 3 x 1 kW) = 3 x 36 mQ; type FEY 3100606 - 3 x 0.036 with continuous dissipation 3 x 1,0 kW, connection on 6 connection lugs with screws M12 at the resistor ohmic value + 10% number of connection lugs number of steel-grids type series • filter resistor • FRT resistor • Crowbar resistor • load resistor • charge/discharge resistor • current limiting resistor T634E r47 FRIZLEN GMBH U. CO KG. TEL: 07144/8100-0 FAX: /207630 info@frizlen.com