Cement coated wirewound variable resistors Type series R10 / R20 R40 / R80 Cement coated wirewound variable resistors IP size production range in ohm ± 10% typical power in W at 40° C ambient temperature connections, fast-on (solderable) or on request screw connections M3 in special design(only R40,R80) rotation angle, start to stop rotation angle over winding line of resistance slider excess temperature by nominal power test voltage in kV, 50 Hz weight approx. g with attached micro switch with solder connections change over contact 250 V~, 4 A (in special design fast-on connectors 6,3x0,8) 1-pol. left 1-pol. right 2-pol. left 2-pol. right shaft length fitting to switches D30 and D41: 21 mm available special shaft lengths 18, 21, 24, 40 mm basic construction standard shaft length measured from mounting plate is 35 mm in 2fold in-line configuration (on request also in 3, 4 or 5fold in-line configuration available) configuration of equal resistors on 1 shaft example: 2 equal resistors (each R20), with equal ohmic values (each 1k): type: RZ20-2x1k

Cement coated wirewound variable resistors Type series R100 / R150 R250 / R500 Cement coated wirewound variable resistors IP size production range in ohm ± 10% ambient temperature screw connections rotation angle, start to stop rotation angle, over winding line of resistance slider excess temperature by nominal power test voltage in kV, 50 Hz weight approx. g shaft length fitting to switches D57 and D70: 25 mm available special shaft lengths: basic construction standard shaft length measured from mounting plate is 45 mm with attached micro switch with solder connections change over contact 250...

Cement coated wirewound variable resistors To type series R10 - R500 Enclosure, special designs, accessories IP knob and scale disc for variable resistors scale disc – type K variable resistors dustproof encapsulated, maximal load 0,5 x typical power, with push-on connections 4,8 x 0,8 (solderable) variable resistor, integrated in enclosure, with adjusting knob and scale disc, degree of protection IP 20, connections at the resistor maximal load 0,5 x typical power 12 M 0478 special designs and accessories - zero position - locking device (only R10, R20, R40, R80, R100, R150) - screw driver slot...