Magnetic Filter CC
3Pages

Data Sheet Magnetic Filter CC Friess Magnetic Filter Model CC The Friess magnetic filter CC removes particles simple, fast and reliable, from emulsions, cutting oils, grinding oils, etc. Advantages Improved surface quality due to clean coolant No consumables required Reduced wear of machines, as particles of all sizes down to 1µm are removed Longer service life of the tools used and easy cleaning without opening the filter Significantly reduced operating costs due to longer service life of the used fluid Technical data Dirt holding capacity Number of magnetic rods Dimensions in mm height / diameter

Data sheet magnetic filter CC 1. Operation of the Magnetic Filter With conventional filters, particles smaller than the specified pore size of the filter remain in the liquid and accumulate unhindered. The CC magnetic filter removes ferritic particles of all sizes down to less than 1µm. The magnetic filter removes iron and steel particles. In addition, paramagnetic particles made of stainless steel or hard metal are attracted by the magnetic filter rods and removed from the liquid. Operating principle conventional filter 2. Conventional Filter A. Particles that are smaller than the specified pore...

Data Sheet Magnetic Filter CC 5. Cleaning the Magnetic Filter CC The magnetic filter CC is cleaned without having to open the magnetic filter housing. First, the inlet and outlet valves are closed. Then the magnets in the cladding tube are pulled upwards. Then the bottom drain valve is opened and the collected particles are drained off with some liquid. 6. Applications for Magnetic Filtration Emulsion Grinding oil Washing water Dirt on magnetic filter rods Fuel Drawing and honing oil For more information, consultation and ordering: • Phone +49 21 73 / 520 11 • Internet at www.friess.eu •...