Tubular Heaters
7Pages

Flexible Rohrheizkrper Flexible Tubular Heaters 2-4 > Runde Rohrheizk涶rper Round Tubular Heaters 5 > Einschraubrohrheizkrper Screw in Tubular Heaters 6 > Rippenrohrheizkrper Finned Tubular Heaters 7 >

Square stainless steel tubular heaters BASE-flex (1.4541) are a reliable industry standard for the use in heating platens and manifolds. In contrast to traditional tubular heaters with a round section which have to be bent by machines, square BASE-flex can be fitted into any rectangular groove with simple hand tools. Moreover, the square shape results in a bigger heat emitting area of up to 80% compared with a corresponding round section. Finally, the easy manual mounting saves the usually high technical expenditure for casting-in / soldering / cementing of bent round tubular heaters. A...

Anschlussstift Terminal pin Standard (ab Lager) Auf Anfrage mit Keramikanschlussklemme Standard (from stock) On request with ceramic connector Flachstecker 6,3 mm Blade terminal 6,3 mm Standard (ab Lager) Auf Anfrage mit M4-Schraubklemme Standard (from stock) On request with M4-screw bracket Gewindestift Threaded pin 6 x 6 mm M3 Auf Anfrage (Mindestabnahmemenge beachten) 8 x 8 mm M3 Auf Anfrage mit Mutter und Unterlegscheiben 6,5 mm M2,5 On request On request with nut and washers 8,5 mm M4 (please note the minimum order quantity) 10,0 mm M4 Mit Anschlussleitung With leads Auf Anfrage On...

Lieferbare Abmessungen und Materialien Available dimensions and materials 5,0mm (1.4541 / 2.4068 ) (MindestlҤnge: 250 mm / maximale Lnge: 1000 mm) 5,0 mm (1.4541 / 2.4068 ) (min. length: 250 mm / max length: 1000 mm) 6,5 mm (1.4404 / 1.4828 ) (Mindestlnge: 330 mm / maximale L䤤nge: 3000 mm) 6,5 mm (1.4404 / 1.4828 ) (min. length: 330 mm / max length: 3000 mm) 8,5 mm (1.4404 / 1.4571 / 1.4828 / 1.4876 / 2.4858) (Mindestlnge: 330 mm / maximale Lnge: 4500 mm) 8,5 mm (1.4404 / 1.4571 / 1.4828 / 1.4876 / 2.4858) (min. length: 330 mm / max length: 4500 mm) 10 mm (1.4304 / 1.4541) (Mindestl䤤nge:...

Finned Tubular Heaters are the ideal solution for air or gas flow heating processes. The ribs enlarge multiply the heat-emitting surface. Basis of the finned tubular heaters are our 8.5 mm tubular heaters. The outer diameter of the fins is 28 mm. The elements can be delivered straight, U-shaped or circular (special design on request). Tubular heater as well as fins are made of stainless steel, the standard for the tube is 1.4828 (other materials possible as in chapter 4.2), the fins are normally made of 1.4301 (1.4571 on request). Fixing: Rippenrohrheizkrper sind die ideale L涶sung fr die...