cat_frico_ags5000_gb
9Pages

AGS5000 Air curtain for doors in industrial and large premises, with intelligent control • Recommended installation height 5 m* • Horizontal mounting • Lengths: 1,5, 2, 2,5 and 3 m 1 Ambient, no heat 2 Water heat WL Application AGS5000 is a powerful air curtain intended for industrial doors but it can also be used for entryways in other large premises such as shopping malls. With its many clever, energy saving functions, the air curtain gives effective protection, specially adapted for your door. Design AGS5000 has a timeless, clean design. The air curtain is intended for horizontal installation, models for vertical and recessed installation are available for special order. Optimized airflow with Thermozone technology. Product specifications • Prepared for the SIRe control system whose pre-programmed default settings and many features make it easy to install and use the air curtain. Read more about the SIRe controls package in the "Controls" section. Measurements according to ISO 27327-1. Average values for products in the series. • The following models are available for special order: - with electrical heating - with water coil WH for high water temperatures - with alternative water connections - for vertical installation - for recessed installation in suspended ceilings • Intake grilles that can be opened make it easy to access the water coil. The grille is easy to clean from the outside. • Adjustable outlet grille makes it possible to direct the air for optimum air curtain effect. • Corrosion proof housing made of hot zinc-plate and powder enamelled steel panels. Colour: white, RAL 9016, NCS S 0500-N.Colour grille: grey, RAL 7046. 2013-04-12 *) Recommended installation height varies depending on the relevant premises.

Technical specifications Type Output Airflow*1 Sound Voltage Amperage Length Weight 6 Water heat - AGS5000 WL, coil for low water temperature (<80 °C) Type Output*4 Airflow*1 At*3-4 Water Sound Voltage Amperage Length Weight volume level*2 motor motor *1) Lowest/highest airflow of totally 5 fan steps. *2) Conditions: Distance to the unit 5 metres. Directional factor: 2. Equivalent absorption area: 200 m2. At lowest/highest airflow. *3) At = temperature rise of passing air at maximum heat output and lowest/highest airflow. *4) Applicable at water temperature 60/40 °C, air temperature, in +18...

Electrical connection Water connection Connection dimensions, inside thread L [mm]

AGS5000 Mounting and connection The air curtain is installed horizontally with the supply air grille facing downwards as close to the door as possible. A variety of installation options are available; brackets for wall mounting or threaded bars for ceiling mounting. Design package for an installation with concealed mountings, cables and pipes is available as an option. For the protection of wider doorways, several units can be mounted next to each other. Connection The PC board SIRe is built into the air curtain on delivery and is equipped with modular connectors for easy connection of...

Brackets for installing unit horizontally on a wall. Two are required for 1 and 1.5 metre units, while 2 and 2.5 metre units need three and 3 metre units need four. Used to conceal mountings, cables and pipes. Special order to required dimension. GP1010, threaded bar Threaded bar for mounting in ceilings. Length 1 m. M10. Four are required for 1 and 1.5 metre units, while 2 and 2.5 metre units need six and 3 metre units need eight. GCSB, square design kit Used to conceal mountings, cables and pipes. Special order to required dimension. Quantity included Wall bracket

AGS5000 Controls Advanced Competent This air curtain is supplied with an intregrated PC board SIRe. There are three different levels with different functionality to choose from, Basic, Competent or Advanced. Read more about the SIRe control system in the "Controls" section. Control system SIRe Basic Control system SIRe Competent Control system SIRe Advanced Water control Used with SIRe Basic and Competent. VOS Used with SIRe Advanced. VOT Valve kit VOS(P), VOT, VMO(P) or VMT is used to control the water flow. For more information see the "Controls" section. Type Valve kit on/off, low flow,...

Water control Choose valve kit Water heated units that are controlled by SIRe are supplemented with valve kits. It’s easy to choose the right valve kit. Look at the guide for the level of SIRe chosen - Basic, Competent or Advanced and select the valve kit which suits the system requirements and characteristics. SIRe Basic, SIRe Competent VOS, valve kit on/off • Complete kit with two way control and adjustment valve, on/off-actuator, shut-off valve and bypass. VOS15LF • Kvs 0,90 • Max flow at 10 kPa: 0,079 l/s • DN15 VOS15NF • Kvs 1,8 • Max flow at 10 kPa: 0,158 l/s • DN15 VOS20 • Kvs 3,4 •...

Output charts water *1) Recommended outlet air temperature for good comfort and optimized output. *2) Nominal output at given supply and return water temperature. See www.frico.se for additional calculations.

AGS5000 Wiring diagrams Internal wiring diagram AGS5015/5020/5025 AGS5025 AGS6020 °C Yellow Orange Red Brown Black Green Blue Internal Motor sensor protection Internal Motor sensor protection Blue Black Blue Black Yellow Orange Red Brown Black Green Blue Yellow Orange Red Brown Black Green Blue