G-235 (Z700 metric) mill galvanized steel panels and basin. All prime steel condensing coil, hot dip galvanized after fabrication (HDGAF). G-235 (Z700 metric) mill galvanized steel panels and basin. All prime steel condensing coil, hot dip galvanized after fabrication (HDGAF). G-235 (Z700 metric) mill galvanized steel panels and basin. All prime steel condensing coil, hot dip galvanized after fabrication (HDGAF). Standard Unit Construction • Stainless steel coil • Stainless steel casing • Stainless steel coil and casing • Stainless steel coil • Stainless steel casing • Stainless steel coil and...

ECOSS Stainless Steel Evaporative Condenser Induced draft, stainless steel evaporative condenser with EC motor axial fan assembly is built to withstand the tests of time. UV resistant, corrosion resistant, inlet louvers Access package: Ladder with safety cage, external walkway and perimeter railing Motor davit(s) Internal walkway High static stability and 50% less1 operating weight Factory on-site support for rigging and startup Pre-assembled platform (Top-access) Wiring to terminal box lower coil-fan/basin sections eliminates the use of drift pins, sealer tape, screw tappers, chain come-alongs...

ECOSS BENEFITS (Cont.) Long Service Life Self-Passivating Stainless Steel provides a minimum product life of two times that of G-235. Welded Stainless Steel Basin - All factory seams in the basin are fully welded to ensure watertight assembly and are fully warranted against leaks. ASME Certified Serpentine Coil - Constructed and fabricated with ANSI rated materials, in compliance with ASME Section VIII, BPV Code. Fabrication to this stringent standard translates into higher reliability overall. EC Fan 10+ Year MTBF - With a stainless steel shaft and bearings and an epoxy coated body, this design...

IDCF BENEFITS IDCF FEATURES Stainless steel construction with welded basin Vibration cutout switch Pre-assembled external platforms, ladder & safety cages Variety of access options meeting OSHA requirements Structure Upgrade: Certified to withstand up to an SDS of 3.75g and wind loads up to 200 psf Redundant fan option on 12'x18' units Overview IDCF models are the only counterflow, induced draft evaporative condensers with axial fans which use a patterned coil/ fill technology to maximize heat rejection. Incorporating the same robust construction and features found in the IDC3, the use of a secondary...

Maximizes thermal efficiency, reduces coil scale and refrigerant charge, while incorporating the same robust construction and features found in the IDC3. IDCF CONSTRUCTION DETAILS Heavy Duty Construction G-235 (Z700 metric) mill galvanized steel panels Robust structural frame ensures squareness Water Distribution System Schedule 40 PVC spray branches Large orifice, 360° nonclog spray nozzles Toolless removal of spray branches Nozzles in spray branches use grommet design, snapping in/out for easy maintenance Interstitial Coil/Fill Continuous serpentine, steel tubing Hot-dip galvanized after fabrication...

IDC3 Induced Draft Evaporative Condenser The IDC3 induced draft, axial fan, evaporative condenser improves on the successful previous generation – the IDC2. IDC3 FEATURES By incorporating new features designed to reduce installation time, the IDC3 induced draft, axial fan, evaporative condenser delivers savings to both owners and contractors and is the ideal choice for new or replacement projects. The IDC3 has a capacity range of 41 - 2,734 ammonia tons in a single unit. Standard Features Robust Structure - Frame around the coil casing NEW! Assures squareness during shipping and rigging, and...

IDC3 CONSTRUCTION DETAILS Heavy Duty Construction G-235 (Z700 metric) mill galvanized steel panels Robust structural frame ensures squareness Water Distribution System Schedule 40 PVC spray branches Large orifice, 360° nonclog spray nozzles Toolless removal of spray branches Nozzles in spray branches use grommet design, snapping in/out for easy maintenance Interstitial Coil Continuous serpentine, steel tubing Hot-dip galvanized after fabrication (HDGAF) Max. allowable working pressure is 300 psig Sloped tubes for free drainage of fluid Fabricated per ASME B31.5 standards Orders shipping into...

XLP2 Forced Draft Evaporative Condenser Forced draft evaporative condenser with axial fans designed for energy efficiency, reliability, maintainability, and easy field assembly. XLP2 FEATURES XLP2 models are forced draft evaporative condensers with axial fans to minimize energy consumption. Units are designed to address the energy efficiency, reliability, maintainability, and field assembly needs of the market. These benefits provide the end user with long service life, and ease of installation and commissioning for the contractor. The XLP2 has a capacity range of 87 - 1,443 ammonia tons in a...

XLP2 CONSTRUCTION DETAILS Heavy Duty Construction G-235 (Z700 metric) mill galvanized steel panels Water Distribution System Schedule 40 PVC spray branches Large orifice, 360° nonclog spray nozzles Nozzles in spray branches use grommet design, snapping in/out for easy maintenance Coil Continuous serpentine, steel tubing Hot-dip galvanized after fabrication (HDGAF) Max. allowable working pressure is 300 psig Sloped tubes for free drainage of fluid Fabricated per ASME B31.5 standards Orders shipping into Canada are supplied with a CRN Drift Eliminators Recyclable polyvinyl chloride (PVC) Impervious...

ECC Centrifugal Evaporative Condenser Forced draft evaporative condenser with centrifugal fans designed for both indoor or outdoor applications where external ductwork or other sources of static pressure exist. ECC FEATURES Overview ECC models are evaporative condensers with centrifugal fans and are suited to applications where external ductwork or other sources of external static pressure exist. The ECC has a capacity range of 7 - 1,140 ammonia tons in a single unit. Standard Features Forced draft Low sound centrifugal fan Hot-dip galvanized after fabrication (HDGAF) coil assembly in accordance...