1. Catalogs
  2. Freudenberg
  3. Woven Bontec HS

Woven Bontec HS

Woven Bontec HS

Product catalog summary
Overview: The document provides detailed information about Bonar Technical Fabrics' range of geotextiles, specifically focusing on the Bontec HS woven geotextiles. These products are designed for soil reinforcement applications and are manufactured from high tenacity polyester yarns.
Specifications: Bontec HS geotextiles offer tensile strengths ranging from 70 kN/m to 600 kN/m. They exhibit low elongation at high loads, with mechanical properties that provide high tensile strengths at low extensions (2-6%). The geotextiles are suitable for use in various soil types and granular fills, and they have low creep characteristics, which are crucial for soil reinforcement.
Applications: These geotextiles are used in the construction of reinforced soil walls, basal reinforcement of embankments over soft soil, load transfer platforms, and spanning areas of potential mining subsidence. They are designed to provide tensile resistance within soil masses, which are typically strong in compression but weak in tension.
Product Features: HS Woven Polyester Geotextiles are capable of carrying high tensile loads over extended periods. The stresses are transferred into the reinforcement plane through friction between the soil and the fabric. This results in a structurally sound and cost-effective solution for reinforcement applications.
Additional Products: The Bontec range also includes Standard Grade, Highflow Wovens, and Thermally Bonded & Needlepunched Nonwovens.
Contact Information: The document provides contact details for Bonar Technical Fabrics NV/SA in Belgium and Bonar Yarns & Fabrics Ltd in Scotland for further inquiries and technical support.
Graph Analysis: A graph is included comparing the elongation properties of different geotextile types, including Woven PET, Woven PP, and Nonwoven, measured in kN/m.
See more

Catalog excerpts

Woven Bontec HS-1

A TOTAL RANGE OF GEOTEXTILES WE UNDERCOVER THE WORLD Headquarters: BONAR TECHNICAL FABRICS NV/SA Industriestraat 39 B-9240 Zele BELGIUM T.: +32 (0) 52 457 487 F.: + 32 (0) 52 457 495 E-MAIL: [email protected] website: www.bonartf.com BONAR YARNS & FABRICS Ltd St. Salvador Street Dundee Scotland DD3 7EU T.: +44 (0)1382 346102 F.: +44 (0)1382 229238 E-MAIL: [email protected] For UK and Ireland: Bontec HS woven geotextiles are manufactured from high tenacity polyester yarns and are available in a wide range of tensile strengths ranging from 70 kN/m to 600 kN/m in the principal load carrying direction. Bontec HS facts include: Tensile strengths ranging from 70 to 600 kN/m width Low corresponding elongations at high loads HS Mechanical Properties that offer high tensile strengths at low corresponding extensions (2-6%). Hydraulic properties suited for use in most soils and granular fills. Low creep characteristics, a critical property for soil reinforcement applications. Available ex-stock in 5.25m wide rolls HS products have been specifically designed for use in reinforced soil. As soil is very good in compression but weak in tension, then HS grade geotextiles may be included within the soil mass to provide tensile resistance. Typical applications for HS products include: Use in the construction of reinforced soil walls. Basal reinforcement of embankments constructed over soft soil. Use in load transfer platforms for transferring embankment loads onto the underlying pile caps. Spanning over areas of possible mining subsidence. HS Woven Polyester Geotextiles have the ability to carry high tensile loads for many years. During use, the stresses are transferred into the plane of the reinforcement by friction between the soil and the reinforcement fabric. Their ability to offer high strength at a low extension means that their inclusion can offer a structurally sound and cost effective engineering solution to your reinforcement applications. For further product information, be it a technical data sheet or to discuss your project with one of our in-house geotextile experts please do not hesitate to contact one of our offices listed below.. H S Wo v e n G e o t ex t i l e s “A range of woven polyester geotextiles that have been specifically developed to offer high tensile strength at low extension. The high modulus polyester multifilament yarns used in the production of these HS fabrics offer excellent creep characteristics making them the perfect choice for use in soil reinforcement applications.” POLYESTER SOIL REINFORCEMENT GEOTEXTILES FOR USE IN THE CONSTRUCTION OF VERTICAL WALLS, STEEP SLOPES AND EMBANKMENTS OVER SOFT GROUND. PRODUCT PROFILE R E I N F O R C E M E N T Headquarters: BONAR TECHNICAL FABRICS NV/SA Industriestraat 39 | B-9240 Zele | BELGIUM T.: +32 (0) 52 457 487 | F.: + 32 (0) 52 457 495 E-MAIL: [email protected] For UK and Ireland: BONAR YARNS & FABRICS Ltd St. Salvador Street | Dundee | Scotland | DD3 7EU T.: +44 (0)1382 346102 | F.: +44 (0)1382 229238 E-MAIL: [email protected] Other geotextiles available within the Bontec range include Standard Grade, Highflow Wovens and Thermally Bonded & Needlepunched Nonwovens Visit us at our website: www.bonartf.com HS WOVEN GEOTEXTILES 400 350 300 250 200 150 100 50 2 4 6 8 10 12 14 16 18 20 22 24 25 elongation Woven PET Woven PP Nonwoven kN/m

 Open the catalog to page 1
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.