0-MAK Zero Point Clamping
1 / 20Pages

ZERO POINT SYSTEM

AT FRESMAK INNOVATION IS NOT AN OPTION IT IS OUR ATTITUDE Fresmak was founded in 1967 focused on manufacturing high pressure vices. Nowadays, it has a wide range of clamping solutions and exports to over 50 countries worldwide. Above all, Fresmak are people. Highly trained professionals with a constant attitude to improve and innovate in all processes; from planning right up to its implementation at customers facilities. ARNOLD BLOCK-SC Germany ■ Argentina ■ Australia ■ Austria ■ Belgium ■ Brazil ■ Canada Chile ■ Colombia ■ Denmark ■ USA ■ Slovakia ■ Slovenia ■ Spain ■ Estonia ■ France ■...

EXPERIENCE Fresmak is the first high pressure vice manufacturer in the world, focused ever since exclusively on clamping through a a constant feedback from its clients. This has allowed Fresmak to acquire a degree of knowledge and experience that guarantees its customers the best solution for clamping their workpieces. SPECIALIZATION Fresmak has a wide and complete range of clamping solutions, both standard and tailor made. The company is constantly investing in R + D + i and is involved in innovation projects , both nationally and internationally, where it is considered a specialist in...

ZERO POINT SYSTEM

Zero Point System Fresmak: Smart Clamping Base plates and tombstones Base plates and nipples

0-MAK Zero Point System POSITIONING AND CLAMPING SYSTEM » EASY Easy to mount on a base plate. A H7 slot has to be machined on the base plate to accommodate the 0-MAK cylinder. Once the nipples are placed, positioning and clamping are achieved in seconds. Ready to work in seconds. 4" PRECISE Aligns and holds at the same time. The system has a holding power up to 55kN and high repeatability within a tolerance of 0.005 mm. Clamping elements such as vices, blocks, fixtures as well as work-pieces can be mounted by simply using nipples at the bottom so that they can be quickly changed and at a...

Zero Point System Fresmak 0-MAK zero-point system is the perfect way to optimize work-piece or fixture change. -> High centering repeatability < 0.005 mm Reduces to minimum work-piece or fixture change time -> Increases machine working time -> Its high clamping power and the way it is applied, avoids vibrations while machining Extend tooling life -> Multipurpose interface capable of adapting to the different areas of the production process A SET-UP TIME The 0-MAK system is a quick and accurate system for changing of clamping elements that reduces work-piece as well as fixture set-up time,...

0-MAK ADVANTAGES Mechanically actuated, without turbo When clamped, it achieves a descending holding power between 10kN and 20kN and a side retaining power of 25kN and 55kN. Pneumatically operated for the opening process for loading the workpiece and releasing it once the machining process is over. Needs 6 bar pressure. Optimized power transmission Optimized power transmission caused by the contact of every ball in just three points within one of each of the inclined surfaces that generate the clamping power. Easy to fit together The geometry of the nipple, together with the chanfer in the...

Zero Point System 0-MAK Zero Point System 0-MAK Compact Compact design and low profile do not detract Z-travel, what allows the machining of high workpieces. Accessibility to 5 sides 5 sides machining can be performed without any collision risk. Keynuts option Four cross keynuts at 90° for single use as well as for positioning work-pieces at 90°. Full protection O-MAK is a closed system. Clamping through spring assembly and unclamping by means of compressed air. Absolutely irreversible. This feature provides safety while machining. Safety system High quality material It has a mechanical...

Zero Point System TECHNOLOGY BEHIND THE 0-MAK 0-MAK clamping power is achieved mechanically by springs located inside the cylinder. This power is transmitted to the nipples through a number of balls that make connection between the 0-MAK and the work holding to be fastened. The system always remains clamped. It is opened using compressed air (6 bar). Its special design allows high clamping power without the need of any extra air supply (turbo). Clamping power pulls down the vice, block, fixture or workpiece making a perfect contact with the 0-MAK cylinder ground surface. This pull down...

Zero Point System Pull-in power Contact with ground surface Holding power Clamping elements

0-MAK Zero Point System FEATURES > Pneumatic opening. > Mechanical clamping effect through compressed springs. > Transmission of power through precision balls. > No turbo needed. > Air blowing for inside cleaning as standard. > Repeatability <0.005mm > Working pressure: 6 Bar. Holding Retaining Working Repeatability Weight

Zero Point System 0-MAK FEATURES > Pneumatic opening. > Mechanical clamping effect through compressed springs. > Transmission of power through precision balls. > No turbo needed. > Air blowing for inside cleaning as standard. > Repeatability <0.005mm > Working pressure: 6 Bar. SET SUPPLIED • Cylinder • 8 bolts • 5 allen-set screws • 1 o-ring • 8 caps for protecting screws • Brochure Holding Retaining Working Repeatability Weight

0-MAK Zero Point System FEATURES > Pneumatic opening. > Mechanical clamping effect through compressed springs. > Transmission of power through precision balls. > No turbo needed. > Air blowing for inside cleaning as standard. > Repeatability <0.005mm > Working pressure: 6 Bar. > 4x90° Keynuts for exact positioning at 90°. > Anti-turning system. SET SUPPLIED • Cylinder • 8 bolts • 5 allen-set screws • 1 o-ring • 8 caps for protecting screws • Brochure Holding Retaining Working Repeatability Weight

Zero Point System 0-MAK FEATURES > Pneumatic opening. > Mechanical clamping effect through compressed springs. > Transmission of power through precision balls. > No turbo needed. > Air blowing for inside cleaning as standard. > Repeatability <0.005mm > Working pressure: 6 Bar. > 4x90° Keynuts for exact positioning at 90°. > Anti-turning system. SET SUPPLIED • Cylinder • 8 bolts • 5 allen-set screws • 1 o-ring • 8 caps for protecting screws • Brochure Holding Retaining Working Repeatability Weight