GAS ANALYZER SMART CONTROL 300 The SmartControl 300 is a cost-effective stationary NDIR measuring device. Its main area of application is the monitoring of threshold concentrations in various gas mixtures. It is designed exclusively for measuring high concentration ranges. The Smart Control 300 is used to monitor threshold concentrations of solvent-containing gas mixtures. • Solvent monitoring • Surface treatment • Industrial applications Display and LED indicators Up to two measuring points Easy to integrate High long-term stability Measurements in vacuum possible CONTACT Fresenius Umwelttechnik GmbH Doncaster-Platz 5 45699 Herten Tel.: MADE IN GERMANY We are your competent partner for gas measurement applications. Our analyzers are developed and produced exclus

Technical Data SMART CONTROL 300 Model Smart Control 300 Sample Gas Inputs 1 (standard), expandable up to 3 Measurement Technology IR: NDIR single-beam method, cuvette heated to 50°C Gas Components NDIR 1-3 (perchloroethene, KWL, freon) Other substances on request Measurement Range Dependent on substance Measurement Uncertainty < 5 % of the measured value Detection limit / Resolution Dependent on substance Measured Value Correction Pressure compensation, cross-sensitivity correction Pressure Tolerance Standard 0.7 to 1.1 bar (process gas pressure) Internal Sample Gas Pump/ Yes Flow Rate Standard...

Technical Data SMART CONTROL 300 Electrical Inputs 4 digital inputs 24V AC/DC Electrical Outputs 1 digital output “ready” (relay) max 48 V / 500 mA 1 digital output “fault” (relay) max 48 V / 500 mA 4 digital outputs (relay) max 48 V / 500 mA, expandable up to 8 Data Interfaces Standard: RS232 Optional: Profibus DP, Ethernet Modbus TCP, Ethernet IP, Profinet, up to 8 analog outputs (galvanically isolated) 4-20 mA, freely configurable via display menu Operational Readiness Readiness to measure substance-dependent Full specifications reached after 30 min #greentech Made in Germany fresenius Umwelttechnik...