Gas Analyzer GA210 O2 Paramagnetic Data Sheet

Product catalog summary

Overview: The Gas Analyzer 210 O2 Paramagnetic is designed for efficient online measurement of oxygen in process gases, utilizing a reliable paramagnetic measurement method.

Key Features:

High long-term stability with minimal calibration needs.
Continuous measurements with quick response times and minimal cross-influence from other gases.
Open interface architecture for flexible data transmission (standard RS232).
Low service costs due to reduced maintenance requirements and high operational reliability.
User-friendly operation with a touch panel displaying direct measured values.

Technical Specifications:

Measurement Technology: Paramagnetic measuring cell for oxygen (O2).
Measurement Range: 0-25 Vol.-%, 0-50 Vol.-%, 0-100 Vol.-%.
Measurement Uncertainty: Less than 0.5 Vol.-% O2 per week.
Response Time: Less than 10 seconds.
Pressure Tolerance: Standard 0.7 to 1.1 bar.
Sample Gas Flow Rate: Standard 4 l/min at sample gas input.
Climatic Conditions: Ambient temperature 5° - 45° C, relative humidity ~90%, dew-free.
Operating Voltage: Standard 230 V AC / 50 Hz, alternative options available.
Protection Class: IP 20.
Weight: 12.8 kg.

Operational Details:

Operational readiness is achieved in 5 minutes, with full specifications reached in 30 minutes.
Menu navigation is facilitated via a 2.5” resistive touch display.
Data Interfaces: Standard RS232, with optional Profibus DP, Ethernet Modbus TCP, Ethernet IP, Profinet.

Contact Information: Fresenius Umwelttechnik GmbH, Doncaster-Platz 5, 45699 Herten, Germany. Phone: +49 2366/ 93 96 1 – 10, Email: [email protected], Website: www.fresenius-ut.com

Catalog excerpts

Gas Analyzer GA210 O2 Paramagnetic Data Sheet-1

The Gas Analyzer 210 02 paramagnetic was developed for quick and easy online measurement of oxygen in process gases. • High long-term stability and low calibration effort due to reliable paramagnetic measurement method • Continuous measurements with short response time and minimized cross-influences from other gas components • Open interface architecture for flexible data transmission (standard RS232) • Low service costs due to reduced maintenance requirements and high operational reliability • Pharmaceutical industry • Direct measured value display and user-friendly operation via touch panel with menu navigation in plain text Fresenius Umwelttechnik GmbH Doncaster-Platz 5 45699 Herten % wwv.fresenius-ut.com #greentech Made in Germany % /freseniusumwelttechnik Q @fresenius_umwelttechnik /freseniusumwelttechnik @fresenius_UT

Open the catalog to page 1

Gas Analyzer GA210 O2 Paramagnetic Data Sheet-2

Technical Data GAS ANALYZER GA 210 O2 PARAMAGNETIC Model Gas Analyzer 210 O2 paramagnetic Sample Gas Inputs 1 (standard), expandable up to 6 2 calibration inputs (nitrogen, oxygen) Measurement Technology Paramagnetic measuring cell Measurement Uncertainty < 0.5 Vol.-% O2 (absolute) per week Detection limit / Resolution 0.1 Vol.-% Zero point deviation < ±0.1 Vol.-% O2/week (offset) Measurement Interval 1 s, response time < 10 s Measured Value Correction None required Pressure Tolerance Standard 0.7 to 1.1 bar (process gas pressure) Internal Sample Gas Pump/ Flow Rate Internal: fixed pre-pressure,...

Open the catalog to page 2

Gas Analyzer GA210 O2 Paramagnetic Data Sheet-3

Technical Data GAS ANALYZER GA 210 O2 PARAMAGNETIC Operation Menu navigation via 2.5” resistive touch display Electrical Inputs 4 digital inputs 24 V AC/DC Electrical Outputs 1 digital output “ready” (relay) max 48 V / 500 mA 1 digital output “fault” (relay) max 48 V / 500 mA 4 digital outputs (relay) max 48 V / 500 mA, expandable up to 8 Data Interfaces Standard: RS232 Optional: Profibus DP, Ethernet Modbus TCP, Ethernet IP, Profinet, up to 8 analog outputs (galvanically isolated) 4-20 mA, freely configurable via display menu Operational Readiness Measurement readiness reached after 5 min Full...

Open the catalog to page 3