The industrial exhaust gasket fgr extremely tough mechanical Material profile High-quality aramid fibres and functional fillers are the basic materials used to manufacture novaform® SK, reinforced by a galvanised zigzag twill fabric (1.0314), Materials with excellent properties are produced from this raw material blend: • extremely high tensile strength • outstanding pressure resistance • maximum temperature stability • unique mechanical resistance and • stable long-term sealing properties, even under extreme conditions Application areas novaform® SK is the ideal choice for use in the exhaust section of diesel engines, • for extreme thermal and mechanical conditions, particularly for hot exhaust fumes, e.g. for exhaust systems, exhaust turbochargers, compressors • can be combined very effectively with inner eyelet to improve performance Frenzelit has obtained certification that the company complies with the require- This means complete transparency in all areas anda high degree of security for our Do you have any questions about your application? The gasket information service will help you: ICAL TEXTILES EXPANSION JOINTS

Technical information about novaform® SK Recommendation for hot exhaust fumes Deformation under temperature 2.0 mm Material data General Data Anti-stick coating Sheet size and thickness tolerance rolled-on graphite layer both sides black (dark grey) The temperature and pressure recommendations in the graphs apply to gaskets with a thickness of 2.0 mm and smooth flanges. Higher stresses are possible when thinner gaskets are used! Exact data for specific individual cases are available in the Frenzelit novaDISC programme or contact our application engineering specialists. Warranty exclusion In view...