novaform® GB High Performance Metal Bead Gaskets Material profile High performance metal bead gaskets novaform® GB consist of thin sheet metal with or without elastomeric coating applied in a coil-coating process. The gaskets are stamped and embossed in a sequential cutting machine. • For small bridges • Even at low surface pressures • Almost no setting – permanently tight Preformed beads in novaform® GB ensure the macro adaptation of the metal gaskets to the sealing surfaces. A special elastomer coating on the steel sheet ensures the gaskets' micro sealing. The combination of different materials guarantees that the joint is permanently tight even with low bolt loads or unfavourable thermal and mechanical conditions. Application areas • Automotive secondary gaskets - passenger vehicle engines - commercial vehicle engines - engine components - exhaust systems - powertrain • Industrial applications - gearboxes - compressors - pumps - motors - other aggregates Good for people and the environment Frenzelit has obtained certification that the company complies with the requirements of both ISO/TS 16949 and ISO 14001. This means complete transparency in all areas and a high degree of security for our customers. Do you have any questions about your application? The gasket automotive information service will help you: [email protected] GASKETS TECHNICAL TEXTILES EXPANSION JOINTS INSULATION NEW MATERIALS

Technical information about novaform® GB Design Design possibilities The material consists of a steel sheet and an elastomer coating on both sides. Base material Materials novaform® GBS novaform® GBC Base materials carbon steel stainless steel, rolled to higher tensile strength Further base materials and thicknesses are available on request. Coatings Coatings black, optional with green covering colour with blue covering colour on one side high-temperature coating Further thicknesses of coating and materials are available on request. All previous versions of this prospectus cease to apply. Subject...