rubber gasket. EXPANSION JOINTS Innovative new material profile ingenious raw material blend of high- quality aramid fibres, special functional material combines the characteristics of fibre gaskets with the positive properties of elastomers, thus making it possible to produce a unique performance profile: unevenness at minimum surface pressure levels. Very low leakage levels even when surface pressure is extremely low. Stable long-term properties under Good resistance to media and Smooth processability and safe handling even with filigree gasket Application areas • Sealing of the lids and housings for gear units, drives and pumps etc. • Gaskets for easily deformed structural components made of sheet metal or plastic. • Gaskets for non-rigid structures with large bolt intervals and thus minimum and inconsistent surface pressure distribution. Frenzelit has obtained certification that the company complies with the complete transparency in all areas and therefore provides a high degree of If you have any application engineering questions, we will be delighted to answer them. Just contact:

Characteristic data of novaform® 2300 Application recommendations Media compatibility: novaform® 2300 can also be used in connection with oil, lubricant, grease, fuel, refrigerant or gas. It is considerably more resistant to chemicals and ageing than pure Recommended temperature range: -40°C to 130°C*' Recommended pressure range: max. about 50 bar - the product *' The pressure and temperature limits indicated are influenced to a major extent not only by the characteristics of the material but also by the installation conditions (the surface pressure level in particular). The information provided...