novaflon ® 500
6Pages

ISfiSgu^^ industrial

novaflon® combines decisive advantages over conventionally manufactured PTFE: Excellent media resistance to most lyes and acids throughout the pH range High residual stress Resistant to cold flow High mechanical resistance Wide temperature range from Unlimited shelf life Excellent leakage properties: Meets German fugitive emission regulation TA Luft [leakage rate < IO 4 mbar-l/(s-m)] Perfluorocarbon regulation All-purpose use in the chemical, petrochemical, pharma- ceutical, paper and food industries Oils and greases, acids and alkalis, solvents, refrigerants, water, steam Compliance with...

The better choice: novaflon®- gaskets made from PTFE Modified PTFE with hollow glass micro- Thanks to its extremely high compressibility, novation® such as glass, ceramic and Very good anti-stick properties made from modified PTFE. result, while machine reli- increased. An other advantage: Excellent media resistance chemical industry. Modified PTFE with barium sulphate chemical resistance to strong High mechanical resistance, high pressure resistance strongly optimised creep flat gasket made from modified PTFE. gasket material, which is physiologically harmless, Modified PTFE with novation®...

Technical information about novaflon® Leakage measurement – ASTM F 37 A novaflon® meets the German fugitive emission regulation TA Luft 2.46 2.40 novaflon® 100 novaflon® 200 2.20 Leakage rate λ 5.8·10-6 mbar·l/(s·m) Leakage rate λ 1.7·10-6 mbar·l/(s·m) 2.00 1.83 1.40 1.23 1.09 1.20 1.00 0.75 0.80 0.60 0.40 0.29 0.27 0.24 1.0E+00 1.0E-01 1.0E-02 1.0E-03 1.0E-04 1.0E-05 1.0E-06 1.0E-07 1.0E-08 1.0E-09 1.0E-10 0 0.20 0.12 0.20 Leakage rate (mbar·l/(s·m)) Leakage rate (mbar·l/(s·m)) Fuel A (ml/h) 1.80 1.60 5 10 15 20 25 1.0E+00 1.0E-01 1.0E-02 1.0E-03 1.0E-04 1.0E-05 1.0E-06 1.0E-07 1.0E-08...

Material data Blow-out test passed easily sistance of the gasket system leakage testing. According to able to withstand 1.5 times nominal pressure at very reduced surface pressure levels.The gasket is fitted in a After storage of the flange nitrogen is applied gradually would drop very rapidly if the gasket failed. The gasket is then tested at surface pressure levels. If the further reduction is made to critical case of an extremely low surface pressure level of gaskets demonstrate their sistance in line with the German fugitive emission regulation TA Luft - without vide a certificate...

Good for people and the environment. Frenzelit has obtained certification that the company complies with the requirements of ISO 9001, ISO/TS 16949 and IS014001.This means complete transparency in all areas and a high degree of security for our customers. Quality management IPPC directive and TA Luft Since October 2002 plant operators have had to observe the drasstically tightened threshold values on diffuse emissions - that's what the revised German fugitive emission regulation TA Luft requires which have thus been adjusted to the new European regulation (Council Directive 96/61/EC) as...