Pneumatically Actuated Freebear Unit T-groove insertion type AFU-1625 Series Instruction Manual Thank you for purchasing our product. Before use, please carefully read the following instructions to ensure proper usage. We appreciate your cooperation. This product is a device that assists in the transportation of items through built-in ball bearings (from now on referred to as Freebears), and its operation is controlled by air pressure. • Operating air pressure : Use within the range of 0.3MPa to 0.6Mpa. • Usage environment : For general indoor use. (0°C to 60°C, avoid freezing and condensation) ^Heat-resistant specifications can be customized upon request. • Ensure that water or foreign objects do not enter the compressed air system. • When not in use, release the internal compressed air. • Avoid severe impact to the product. • Do not disassemble or modify the product. Please insert this product into the groove where it is to be installed.

4. Piping Connection The recommended pneumatic circuit diagram for this product is as follows: Normal piping Force exhaust Air source Vacuum device ※The Freebear part of this product does not descent naturally when air is exhausted during the downward operation, due to resistance from the cylinder’s O-ring, among other factors.(Residual pressure has been released, so it will descent under the load of the transported item’s own way, etc.) If it is necessary to force the Freebear part to descend, please refer to the “Forced exhaust” circuit. 5. Connection Method This product can be connected using...

6. Height Adjustment Method The height of this product can be adjusted using separately sold spacers. Parts removal Installation of spacer M4 CAP bolt+ SW height adjustment collar M4 CAP bolt+ SW height adjustment collar ※Fix the spanner part and remove the bolt Spacer Reference spanner dimensions: Width 13mm, Thickness 3mm ※Please provide air to float the Freebear part before proceeding. Adjust height using spacers (thickness and number) ※It is necessary to change the collar and bolt at the same time. When placing and moving transported items on this product, ensure that when Freebears rise...

8. Maintenance and Inspection When the Freebear is dirty, clean it with a cloth using low-viscosity lubricating. 9. Inquiry Should this product operate abnormally or should you have any questions, please contact us or the store/ agent where you purchased it. ※The specification and appearance of this product are subject to change without notice due to the need for improvement.