Catalogs >
The Fredericks Company >
Televac MX200 Vacuum Controller

Televac MX200 Vacuum Controller
3Pages

Catalog excerpts

Operating Specifications Operating Range 1 x 10-11 to 10,000 Torr max Analog Output 0 to 10 VDC (1 per sensor) Analog Output Resolution 16 Bits Programmable Set Points 4 per module (8 max) Set Point Type Relay Calibration Medium Dry air or nitrogen Display Readable Distance 5 m (16 ft) Maximum Sensors Controlled 10 Maximum Sensors Displayed 8 Physical Characteristics Housing Aluminum Electrical Connections Power cord (IEC 60320 C-13) Weight (base unit) 2.2 kg (5 lbs) Dimensions See dimensional drawings • Rack mountable with a highly configurable design • USB/RS-232/RS-485 or USB/EthernetIP included on every unit for simple connection with a PC, PLC, or other equipment • High contrast OLED display with 180° viewing angle • Selectable units of measurement (Torr, mbar, Pascal) • Bootloader for field upgradeable firmware • Gas conversion functions included for Nitrogen/Air, Argon, Hydrogen, Helium, Neon, Krypton, and Carbon Dioxide • Analog outputs (0 to 10 V DC) for every connected sensor • User-configurable linear and logarithmic analog output ranges • Excellent customer support • Designed and manufactured in the USA • (-037) DHCP enable or disable with programmable IP address • (-037) Status LEDs for network/module status/port data activity • (-037) 10 / 100 Mbit, half or full duplex port operation • (-037) Secure web access for network and unit data and settings The MX200 has up to eight relay set points. The relays are located on two optional relay modules with four set points each. Individual relay statuses are displayed on the front panel. The heavy duty relays have an SPDT (1 Form C) contact form and are rated for 24 V DC. They have a maximum current rating of 8 A at 250 V AC or 5 A at 30 V DC. Certifications, Compliance, and Ratings • Certified to UL 61010-1 • CE certified to EN61326-1:2006 • NIST traceable calibration optional The MX200 controls up to 10 Televac vacuum sensors including cold cathode, convection, diaphragm, and thermocouple sensors. The -034 version includes USB/RS-232/RS-485 with up to 8 optional set point relays. The user interface includes six touch controls and a high contrast, 180° viewing angle green OLED screen, which displays the units of measurement and the status of set points simultaneously. Multiple gas types are supported. The MX200 is a modular unit, allowing you to choose a vacuum sensing solution specific to your needs. The -037 version of the MX200 supports EthernetIP (EIP) and is designed as a serial port replacement to interface directly with Rockwell Automation Allen-Bradley Programmable Logic Controllers (PLCs). All data and commands can be sent and received as a Class 3 acyclic request, allowing the user to set up and read data from the MX200 through the PLC at a remote location. All pressure data is available as a Class 1 cyclic output that can be transmitted at a rate settable by the user. The unit includes status LEDs that show network and module status, as well as port activity. If desired, the EIP module comes with a built-in web server that can host a password protected web page that allows the user to change network settings and access all commands from the network. The EIP module utilizes an industry recognized HMS Anybus CompactCom device to handle the network interface. The module has been pre-certi-fied by HMS to provide EthernetIP network conformance. Ordering Information Description Part Number MX200 Base Unit USB/EthernetIP 2-7900-037 Module Part Numbers 2-6200-XXX Slots (max) Set Point Quad Relay -211 1 (2) 1E Dual Piezo Diaphragm -220 1 (5) 1F Dual Piezo Diaphragm -244 1 (5) 7B Penning Magnetron Cold Cathode -227 2 (3) 7EF DI Magnetron Cold Cathode -285 1 (5)

Open the catalog to page 1

MX200 Vacuum Controller Part Number: 2-7900-03X Electrical Connections (USB/RS-232/RS-485) RS-232 D-Sub 9 Pin D-sub Pin 1 D-sub Pin 2 D-sub Pin 3 D-sub Pin 4 D-sub Pin 5 D-sub Pin 6 D-sub Pin 7 D-sub Pin 8 D-sub Pin 9 Description Ground RS-232 TX RS-232 RX No Connection Ground No Connection Ground No Connection Ground Description 1E (1 to 1000 Torr) Piezo Diaphragm 1F (10 to 10,000 Torr) Piezo Diaphragm 2A (10-3 to 20 Torr) Thermocouple 4A (10-3 to 1000 Torr) Convection 7B (10-7 to 10-3 Torr) Penning CC 7E (10-8 to 10-2 Torr) DI Magnetron CC 7F (10-11 to 10-2 Torr) DI Magnetron CC 7FC...

Open the catalog to page 2

MX200 Vacuum Controller Part Number: 2-7900-03X EthernetIP Network Interface Company Information Connectors Ports DHCP 2 X RJ45 10 / 100 Mbit, half or full duplex Enable or disable Class 1 Connections Connection Type Target to Originator (Read) Instance ID Data Size Originator to Target (Write) Instance ID Data Size Configuration Instance Supported Connections Requested Packet Interval Trigger Types Priorities Point-to-point, multicast 100 40 150 4 3 4 1 to 3200 ms Cyclic, change of state Low, high, schedule, urgent Class 3 Connections Service Class Instance Data Value Attribute Supported...

Open the catalog to page 3