Catalogs >
The Fredericks Company >
Televac MX Active Gauge EthernetIP Gateway

Televac MX Active Gauge EthernetIP Gateway
3Pages

Catalog excerpts

Televac MX Active Gauge EthernetIP Gateway - 1

Operating Range 1*10-s to 1*104 Torr max 1*10-s to 1*104 mbar max 1*10-6 to 1*106 Pa max Communications (External) EthernetIP Communications (Active Gauge) RS-485 Active Gauge RS-485 Addresses 1 to 4 Active Gauge RS-485 Baud 38400 Maximum Active Gauges Controlled 4 Maximum CDGs Controlled 1 Enclosure Aluminum Electrical Connections 4-pin connector Dimensions See dimensional drawings The Televac® MX Active Gauge EthernetIP Gateway controls up to 4 Tel-evac® active gauges and one capacitance diaphragm gauge (CDG). The gateway supports EthernetIP (EIP) communications and is designed as a serial port replacement to interface directly with Rockwell Automation Allen-Bradley programmable logic controllers (PLCs). All data and commands can be sent and received as a class 3 acyclic request, allowing the user to change settings and read data from the active gauges through the PLC at a remote location. All pressure data is available as a class 1 cyclic output that can be transmitted at a rate settable by the user. The unit includes status LEDs that show network and gateway status, as well as port activity. The gateway also comes with a built-in web server that can host a password protected web page which allows the user to change network settings and access all commands from a web browser. The EIP gateway utilizes an industry recognized HMS Anybus Compact-Com module to handle the network interface. The module has been precertified by HMS to provide EthernetIP network conformance. Adapters Active Gauge RJ45 to DB15 1-2403-001 Ordering InformationDescription Part Number MX Active Gauge EthernetIP Gateway 2-8900-100 Active Gauge Part Numbers MX2A Thermocouple Gauge 2-8910-1XX MX7B Cold Cathode Gauge 2-8940-XXX Cables Ethernet Cable Cat5e Unshielded 10 ft 1-2401-010 Ethernet Cable Cat5e Unshielded 50 ft 1-2401-050 Ethernet Cable Cat5e Unshielded 100 ft 1-2401-100 Ethernet Cable Cat5e Shielded 10 ft 1-2402-010 Ethernet Cable Cat5e Shielded 50 ft 1-2402-050 Ethernet Cable Cat5e Shielded 100 ft 1-2402-100 • Heat treatment and vacuum furnaces • Thin film deposition and coating processes Visit our website at www.frederickscompany.com for a full list of applications. • Rack mountable with a highly configurable design • EthernetIP for simple connection with a PC, PLC, or other equipment • Indicator LED for gateway status • Bootloader for field upgradeable firmware via USB • Access all settings for Televac® MX series active gauges • Monitor pressure readings from up to (4) active gauges and (1) CDG • DHCP enable or disable with programmable IP address • Status LEDs for network/module status/port data activity • 10/100 Mbit, half or full duplex port operation • Built-in secure web server for network and unit data and settings • Excellent customer support • Designed and manufactured in the USA The combination of the MX2A or MX4A and MX7B will provide full range vacuum measurement from 10-8 to 1000 Torr. This is an optimal solution for heat treat and vacuum furnaces where calibration frequency requirements vary between rough vacuum (MX2A and MX4A) and high vacuum (MX7B) gauges. Certifications, Compliance, and Ratings • Certified to UL 61010-1 • CE certified to EN 61010-1, EN 61326, EN 55011 • Certified to CAN/CSA C22.2 No. 61010-1-12 • RoHS and REACH compliant • IP40 www.frederickscompany.com mx_ag_eip_ds rev 2 page 1 of 3

Open the catalog to page 1

Televac MX Active Gauge EthernetIP Gateway - 2

Active Gauge EthernetIP Gateway Part Number: 2-8900-100 Electrical Connections P1 EthernetIP RJ45 port 1 to PLC/PC BTLD Bootload button USB USB communication for bootloading The RJ45 connectors labeled P1 and P2 are the EthernetIP connections that will run to the PLC or PC. The RJ45 connectors labeled 1 through 4 are the active gauge inputs. These will run through Cat5e Ethernet cables and through an adapter to attach to the active gauges in the network. All active gauges must be set to separate RS-485 addresses 1 through 4 and baud rate 38400 to communicate with the gateway....

Open the catalog to page 2

Televac MX Active Gauge EthernetIP Gateway - 3

Active Gauge EthernetIP Gateway Part Number: 2-8900-100 EthernetIP Network Interface Company Information Connectors (2) RJ45 Ports 10/100 Mbit, half or full duplex DHCP Enable or disable Class 1 Connections Connection Type Point-to-point, multicast Target to Originator (Read) Instance ID 100 Originator to Target (Write) Instance ID 150 Data Size 4 Requested Packet Interval 1 ms to 3200 ms T rigger Types Cyclic, change of state Priorities Low, high, schedule, urgent Class 3 Connections Service Class Instance Data Value Attribute Supported...

Open the catalog to page 3