Televac CC-10 Wide Range Active Vacuum Gauge

Product catalog summary

Operating Specifications
The CC-10 Active Gauge operates within a range of 1 x 10^-9 Torr to 1000 Torr. It supports RS-485 communication and provides an analog output of 0 V to 10 V, which can be linear or logarithmic. The device features three programmable set points and requires a supply voltage between +22 V DC and +26 V DC, with a maximum power consumption of 8 W. It is calibrated using dry air or nitrogen and can withstand overpressure up to 150 psi. The digital output resolution is two significant digits with an exponent, and the analog output resolution is 16 bits. The operating temperature range is 0 °C to 50 °C, with a storage temperature range of -40 °C to 85 °C. The bakeout temperature is 120 °C with electronics removed. The response time is ≤ 500 ms, and accuracy varies across the pressure range.

Physical Characteristics
The enclosure is made of metallized plastic, and the device uses a D-Sub 15-pin male connector. The weight with the sensor is 698 g, and without the sensor, it is 355 g. Dimensions are 3.7” x 2.75” x 6.3”.

RS-485 Commands
The document lists several RS-485 commands for reading units, set points, analog output parameters, and pressure data, as well as setting pressure units and adjusting the crystal gauge.

Benefits
The CC-10 offers a wide measurement range, compact design, easy-to-read LED display, and standard analog and RS-485 communications. It provides excellent resolution, repeatability, and unit-to-unit performance, supported by strong customer service.

Description
The CC-10 Active Gauge uses dual sensor technology to replace multiple vacuum gauges, covering twelve decades of pressure measurement. It features a bright LED display and options for setting parameters via touch controls or RS-485 communications.

Ratings and Compliance
The device is CE certified to EN 61010-1 and EN 61236-1, RoHS compliant, and rated IP40.

Electrical Connections
The document provides a detailed pin description for electrical connections, including analog output, RS-485 communication, and supply voltage.

Materials Exposed to Vacuum
Materials include molybdenum, glass, copper, stainless steel, gold, chromium, solder, fluorocarbon elastomer, and quartz.

Set Points
The CC-10 features three optically coupled solid-state relay set points, each with hysteresis characteristics and independently settable high and low thresholds.

Related Products
The MM200 Vacuum Sensor Controller is mentioned as a related product, capable of controlling various Televac sensors and offering modular features.

Ordering Information
The document provides part numbers for the CC-10 and related accessories, including vacuum fittings, cables, power supplies, and replacement parts.

Catalog excerpts

Televac CC-10 Wide Range Active Vacuum Gauge-1

<STX>0S2<CR> Read error status Description The CC-10 Active Gauge utilizes dual sensor technology to replace multiple conventional vacuum gauges, permitting seamless measurement of twelve decades of pressure. It has a variety of features including a wide range of measurement from 1 x 10-9 Torr up to 1000 Torr, RS-485 communications, three programmable set points, and a selectable analog output. The bright LED display makes it easy to read from a distance. Options can be set from either four touch controls located on the front of the unit or through RS-485 communications. The simplicity of use and wide measurement range make this unit an excellent choice for a variety of vacuum applications. Benefits! • Wide measurement range • Compact design • Easy to read LED display • Analog and RS-485 communications standard • Excellent resolution and repeatability • Superior unit to unit performance • Excellent customer support • CE certified to EN 61010-1, EN 61236-1 • RoHS compliant • IP40 1 See the Televac website at www.televac.com for a list of definitions for terms used in the operating specifications. All test data was acquired at 23 °C. 2 See the CC-10 Instruction Manual for all RS-485 command descriptions and setup instructions. email: [email protected]

Open the catalog to page 1

Televac CC-10 Wide Range Active Vacuum Gauge-2

Electrical Connections Dimensional DrawingsPin Description Analog Out (Ground) Zero adjust input (signal in) HV inhibit signal (signal in) Atm adjust input (signal in) Supply Voltage (-) Analog Out (Ground) Analog Out (0 to 10) V RS-485 A (-) RS-485 B |+) SP3 Out SP2, SP3 COM SP2 Out SP1 COM SP1 Out HV Inhibit Zero Adj Atm Adj EXT Vcc Supply Voltage (-) Supply Voltage (+) Materials Exposed to Vacuum Molybdenum Glass Stainless Steel Ordering Information The CC-10 has three set points. All three are optically coupled solid state relays that are rated for 0.12 A at 50 V DC. Each set point has hysteresis...

Open the catalog to page 2