Catalogs >
The Fredericks Company >
Single Axis Programmable Tilt Switch | Part Number: 0729-1758-99

Single Axis Programmable Tilt Switch | Part Number: 0729-1758-99
2Pages

Catalog excerpts

Single Axis Programmable Tilt Switch | Part Number: 0729-1758-99 - 1

2 open collectors 4.5 V DC to 28 V DC 24 mA @ 12 V DC ±45° 1 <0.1° <5° <0.025° per degree <0.1° <0.006° per °C 0.1% per °C -40 °C to 70 °C -40 °C to 70 °C -40 °C to 125 °C <100 ms 0.5 s 0.35° let Fredericks ^ U COMPANY Single Axis Programmable Tilt Switch Part Number: 0729-1758-99 Output Supply Voltage Supply Current Operating Range Axes of Measurement Repeatability Null Offset Cross Axis (Roll) Sensitivity Long Term Stability/Drift Null Temperature Coefficient2 Scale Temperature Coefficient Operating Temperature Storage Temperature Temperature Sensor Range Time Constant (63.2% of final output) Output Delay Output Hysteresis The 0729-1758-99 Single Axis Programmable Tilt Switch utilizes a 0717-4319-99 Fredericks TrueTilt™ wide range electrolytic tilt sensor and analog signal conditioner. Its robust plastic housing provides excellent durability and environmental protection. This tilt switch has superior tolerances and unit to unit performance. Its low profile housing and economic design make it an ideal solution for a versatile range of applications in all sectors. Electrical Connections 18" cable with 24 gauge wire • Construction vehicles • Agricultural vehicles • Vehicle tip over prevention • Aerial lift platform, boom lift, forklift, scissor lift, and telehandler, operator safety and tip over prevention View a full list of applications on The Fredericks Company website at www.frederickscompany.com. Electrical Connections Certifications and Ratings Red Supply (4.5 V DC to 28 V DC) Black Supply (-) Green Ground for supply and open collectors Blue Left trip point open collector Gray Right trip point open collector • RoHS Compliant • IP64 (note that the standard version of this unit is not potted, epoxy potting is available upon request for IP66 protection) Open Collector Output Description The open collector is open (disconnected from ground) when non-tripped and closed (connected to ground) when tripped. It is rated to a maximum of 200 mA when closed. For opposite open collector output functionality (closed when non-tripped and open when tripped), see the 0729-1757-99. • Very low power consumption • Simple integration • Excellent resolution and repeatability of measurements • Superior performance in extreme temperatures and environments • Excellent customer support • Manufactured in the United States of America 1 Visit www.frederickscompany.com for a list of definitions. 3 Metal housing available upon request. 2 See application note AN1001 for a description of temperature compensation.

Open the catalog to page 1

Single Axis Programmable Tilt Switch | Part Number: 0729-1758-99 - 2

let Fredericks ^ U COMPANY Single Axis Programmable Tilt Switch Part Number: 0729-1758-99 The 0729-1758-99 and all tilt switches in this series must be mounted horizontally (parallel to the surface of the earth and perpendicular to the force of gravity). For best performance, isolate the unit from vibrations when mounting it. Tilt Switches 0729-1757-99 ±45° range, single axis, 2 open collector outputs 0729-1736-99 ±35° range, dual axis, 1 relay output 0729 series inclinometers - Inclinometers provide a continuous output of tilt angle position instead of the on/off functionality of the tilt...

Open the catalog to page 2