Catalogs >
The Fredericks Company >
Glass Mid-Range 0714-5701-99

Glass Mid-Range 0714-5701-99
1Pages

Catalog excerpts

DATA SHEET Operating Specifications Description The 0714-5701-99 Sensor has been used successfully in applications that demand a high accuracy for wider-angle ranges. This sensor provides excellent stability, good repeatability at null and angles, over time and a wide range of temperatures. The hermetic glass to metal construction and solid platinum electrodes guarantee a long operating life and consistent operating characteristics. Angle Range Resolution Null Repeat Applications Include » » » » » Automobile Wheel Alignment Aircraft Avionics Geophysical Monitoring Machine Tool Leveling Medical Positioning and Monitoring Physical Dimensions Vial length Vial diameter Lead length Lead spacing 12 Operating Range (max.) Linear Range ±5° Null Voltage ≤0.030 Volts Null Current(max.) 11.0 mA (continuous) Null Impedance (nom)1 1000 Ohms (25°C) (measured left to right electrode)see fig. 2 Null Repeatability < 12 arc seconds Resolution < 10 arc seconds Symmetry (typ) < 20 % -20 C to +50 C Operating Temperature -50 C to +100 C Storage Temperature Time Constant (1) 2 < 1 sec Materials non-magnetic ± 0.5 arc seconds / C Temperature coefficient at null (when properly mounted) Impedance of the electrolyte may be changed to limit null current Viscosity of the electrolyte may be modified to meet individual requirements to reduce vibration OUTPUT SENSITIVITY Sensor Test Circuitry Tests were conducted by exciting the left and right electrodes with an AC signal of 400 Hz and an rms voltage to produce the maximum current at null as per operating specifications. Output readings are taken between the center electrode and the center of the balanced resistors R1 and R2. Tests were conducted at a temperature of +25 C. See sensor test circuitry in figure 3. Output curve is shown in figure 1. PERCENT OUTPUT -4 0 4 TILT ANGLE (degrees) Descrition of Test Values IMPEDANCE / TEMPERATURE Figure 2 Eout = Angle of tilt from null (Direction of tilt determined by phase of Eout) R1 =R2 = ½ Null Impedance (nom) Caution!-Ensure that all test and operating circuits are entirely free of direct current. Direct current will cause level damage and/or instability. IMPEDANCE (ohms) AC input voltage = Null Current (max) times Null Impedance (nom) The Fredericks Company l 2400 Philmont Ave ● HuntingdonValley, PA 19006-0067 Tel: 215.947.2500 l Fax: 215.947.7464 l Email: sales@frederickscom.com l www.frederickscom.com 0714-5701-99data sheet Revision: A

Open the catalog to page 1