Catalogs >
The Fredericks Company >
Dual Axis Tilt Switch with Relay Output | Part Number: 0729-1763-XX

Dual Axis Tilt Switch with Relay Output | Part Number: 0729-1763-XX
2Pages

Catalog excerpts

Dual Axis Tilt Switch with Relay Output | Part Number: 0729-1763-XX - 1

Fredericks ^ § COMPANY Dual Axis Tilt Switch with Relay Output Part Number: 0729-1763-XX Time Constant (63.2% of fina l output) <100 ms The 0729-1763-XX RS-232 programmable tilt switch utilizes Fredericks TrueTilt™ wide range, mid-range, or narrow range electrolytic tilt sensors and four output relays with user-settable trip points. Its robust plastic housing and epoxy potting provide excellent durability and environmental protection. This tilt switch has superior tolerances and unit to unit performance. Its small profile and economic design make it an ideal solution for a versatile range of applications in all sectors. • Aerial lift platform leveling monitor or control • Crane boom angle measurement • Robotic controls • Satellite dish alignment • Solar panel position and elevation control • Wheel alignment systems View a full list of applications on The Fredericks Company website at www.frederickscompany.com. Description Color Pin Number Output linear X value (0 to 65535) Output linear X value (0 to 65535) Output X value in degrees Output Y value in degrees Change and save trip delay Change and save return trip delay Change and save hysteresis value Change and save relay polarity Set the selected axis trip point Save current position as zero Increase the filter value Decrease the filter value • IP66 • CE certified to CFR 47 FCC Part 15 Subpart B, EN 55011:2009/A1:2010, EN 61326-1:2006 1 See The Fredericks Company website for a list of term definitions 2 Metal housing available upon request • Low power consumption • Extremely long life • Minimal drift over lifetime compared to MEMS devices • Excellent resolution and repeatability • Superior performance in extreme temperatures and environments • Excellent customer support • Manufactured in the United States of America 3 See Operating Manual for a full list of commands 4 Connections shown using a TFC 2-9858-XXX cable

Open the catalog to page 1

Dual Axis Tilt Switch with Relay Output | Part Number: 0729-1763-XX - 2

Ill Fredericks COMPANY Dual Axis Tilt Switch with Relay Output Part Number: 0729-1763-XX Dimensional Drawings Baud Rate 9600 (selectable up to 115200) Parity None Mounting Notes The 0729-1763-XX must be mounted horizontally (parallel to the surface of the earth and perpendicular to the force of gravity). For best performance, isolate the unit from vibrations when mounting it. Related Products 0729 series inclinometers - These inclinometers utilize Fredericks TrueTilt™ wide range electrolytic tilt sensors. They have a variety of outputs including analog, RS-232, and RS-485. These...

Open the catalog to page 2